Claas Ares 567 vs Deutz-Fahr Agrotron 6.20
5 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2005–2007; 1995–1997). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Ares 567 | Agrotron 6.20 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 114 hp | 113.5 hp | — |
| Engine declared | — | Deutz BF6M 1013 E | — |
| Displacement declared | — | 7.15 L | — |
| Maximum torque declared | 293 lb·ft · 397.1 N·m | 340 lb·ft · 461 N·m | +16% Agrotron 6.20 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 21.9 gpm · 82.8 L/min | — |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Three-point lift at ends declared | — | 20,371 lb · 9,240 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,626 lb · 4,820 kg | 11,817 lb · 5,360 kg | +11% Agrotron 6.20 |
| Maximum permissible mass declared | 17,637 lb · 8,000 kg | — | — |
| Wheelbase declared | 100.9 in · 2,564 mm | 108.9 in · 2,767 mm | +8% Agrotron 6.20 |
| Length declared | 185.8 in · 4,720 mm | 184.3 in · 4,680 mm | — |
| Width declared | — | 79.1 in · 2,008 mm | — |
| Height declared | 114.4 in · 2,905 mm | 116.3 in · 2,955 mm | — |
| Ground clearance declared | — | 22.8 in · 580 mm | — |
| Fuel tank declared | 190.2 qt · 180 L | 285.3 qt · 270 L | +50% Agrotron 6.20 |
Claas Ares 567 sources
Source
- Source: Traktorenlexikon, “Claas Ares 567 ATZ”
- Source: OECD test report 2286, 2005
Deutz-Fahr Agrotron 6.20 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 6.20”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”