Claas Ares 567 vs Deutz-Fahr Agrotron 6.15
3 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2005–2007; 1995–1997). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
3 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | Ares 567 | Agrotron 6.15 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 114 hp | 115.1 hp | — |
| Engine declared | — | Deutz. BF6M 1012 E | — |
| Displacement declared | — | 4.79 L | — |
| Maximum torque declared | 293 lb·ft · 397.1 N·m | 308 lb·ft · 418 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | — | 21.7 gpm · 82.3 L/min | — |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,626 lb · 4,820 kg | 11,442 lb · 5,190 kg | +8% Agrotron 6.15 |
| Maximum permissible mass declared | 17,637 lb · 8,000 kg | — | — |
| Wheelbase declared | 100.9 in · 2,564 mm | 104.2 in · 2,647 mm | — |
| Length declared | 185.8 in · 4,720 mm | 178.0 in · 4,520 mm | — |
| Width declared | — | 90.9 in · 2,310 mm | — |
| Height declared | 114.4 in · 2,905 mm | 112.4 in · 2,855 mm | — |
| Ground clearance declared | — | 20.5 in · 520 mm | — |
| Fuel tank declared | 190.2 qt · 180 L | 274.7 qt · 260 L | +44% Agrotron 6.15 |
Claas Ares 567 sources
Source
- Source: Traktorenlexikon, “Claas Ares 567 ATZ”
- Source: OECD test report 2286, 2005
Deutz-Fahr Agrotron 6.15 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 105 MK3”