Case-Steyr M 958 (a) vs Fiat 65-56 LM (DT)

12 material differences

Tractor one

1996–2001

No measured PTO figure

Tractor two

from 1988

No measured PTO figure

Which should you choose?

Read our verdict on the M 958 (a) and the 65-56 LM (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Case-Steyr M 958 (a) and Fiat 65-56 LM (DT), field by field
Field	M 958 (a)	65-56 LM (DT)	Gap
Engine
Engine power, claimed claimed	57.3 hp	64.1 hp	+12% 65-56 LM (DT)
Engine declared	PERKINS 903-27 T	Fiat 8045.06.220 or 320	differs
Displacement declared	2.70 L	3.61 L	+34% 65-56 LM (DT)
Maximum torque declared	136 lb·ft · 184 N·m	151 lb·ft · 205 N·m	+11% 65-56 LM (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	dry Carraro double clutch	Dry LuK or VALEO double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	8.1 gpm · 30.8 L/min	8.7 gpm · 32.8 L/min	+6% 65-56 LM (DT)
Pressure declared	3,481 psi · 240 bar	3,046 psi · 210 bar	+14% M 958 (a)
Three-point lift at ends declared	4,894 lb · 2,220 kg	3,847 lb · 1,745 kg	+27% M 958 (a)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,203 lb · 2,360 kg	5,004 lb · 2,270 kg	—
Maximum permissible mass declared	9,259 lb · 4,200 kg	—	—
Wheelbase declared	83.3 in · 2,117 mm	85.3 in · 2,167 mm	—
Length declared	139.0 in · 3,530 mm	141.7 in · 3,600 mm	—
Width declared	74.4 in · 1,890 mm	71.7 in · 1,820 mm	—
Height declared	87.8 in · 2,230 mm	95.3 in · 2,420 mm	+9% 65-56 LM (DT)
Ground clearance declared	16.1 in · 410 mm	18.9 in · 480 mm	+17% 65-56 LM (DT)
Turning radius, braked declared	—	11.5 ft · 3.51 m	—
Fuel tank declared	77.1 qt · 73.0 L	63.4 qt · 60.0 L	+22% M 958 (a)

Source

Source