Case-Steyr M 9094 a vs Deutz-Fahr Agroplus 95
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the M 9094 a and the Agroplus 95 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | M 9094 a | Agroplus 95 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 92.8 hp | 92.8 hp | — |
| Engine declared | Steyr-MWM WD 401.85 | — | — |
| Displacement declared | 4.16 L | — | — |
| Maximum torque declared | — | 263 lb·ft · 357 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Dry Fichtel & Sachs double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Three-point lift at ends declared | 9,480 lb · 4,300 kg | 10,803 lb · 4,900 kg | +14% Agroplus 95 |
| Rear PTO speeds declared | 430/540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,708 lb · 3,950 kg | 8,378 lb · 3,800 kg | — |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | 13,669 lb · 6,200 kg | — |
| Wheelbase declared | 97.7 in · 2,481 mm | 92.1 in · 2,340 mm | +6% M 9094 a |
| Length declared | 165.9 in · 4,215 mm | 146.2 in · 3,714 mm | +13% M 9094 a |
| Width declared | 85.4 in · 2,170 mm | 81.1 in · 2,060 mm | +5% M 9094 a |
| Height declared | 100.4 in · 2,550 mm | 103.3 in · 2,624 mm | — |
| Ground clearance declared | 17.3 in · 440 mm | 18.6 in · 472 mm | +7% Agroplus 95 |
| Turning radius, braked declared | 14.1 ft · 4.30 m | — | — |
| Fuel tank declared | 105.7 qt · 100.0 L | 147.9 qt · 140 L | +40% Agroplus 95 |
Case-Steyr M 9094 a sources
Source
- Source: Traktorenlexikon, “Steyr M 9094 a”
- Source: Traktorenlexikon, “Steyr 9094”
Deutz-Fahr Agroplus 95 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 95”