Case-Steyr M 9086 a vs New Holland 6635 (A)

11 material differences · fewer than 12

Tractor one

1995–2003

No measured PTO figure

Tractor two

1996–1998

No measured PTO figure

Which should you choose?

Read our verdict on the M 9086 a and the 6635 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Case-Steyr M 9086 a and New Holland 6635 (A), field by field
Field	M 9086 a	6635 (A)	Gap
Engine
Engine power, claimed claimed	84.9 hp	83.9 hp	—
Engine declared	Steyr-MWM WD 401.83	Iveco 8045.25	differs
Displacement declared	4.16 L	3.91 L	+6% M 9086 a
Maximum torque declared	—	217 lb·ft · 294 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch	—	—
Hydraulics & hitch
Pump flow declared	—	11.8 gpm · 44.5 L/min	—
Pressure declared	—	2,103–2,466 psi · 145–170 bar	—
Three-point lift at ends declared	9,480 lb · 4,300 kg	—	—
Rear PTO speeds declared	430/540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,708 lb · 3,950 kg	9,414 lb · 4,270 kg	+8% 6635 (A)
Maximum permissible mass declared	14,330 lb · 6,500 kg	12,787 lb · 5,800 kg	+12% M 9086 a
Wheelbase declared	97.7 in · 2,481 mm	92.2 in · 2,342 mm	+6% M 9086 a
Length declared	165.9 in · 4,215 mm	157.5 in · 4,000 mm	+5% M 9086 a
Width declared	85.4 in · 2,170 mm	79.5 in · 2,020 mm	+7% M 9086 a
Height declared	100.4 in · 2,550 mm	100.4 in · 2,550 mm	—
Ground clearance declared	16.9 in · 430 mm	19.7 in · 500 mm	+16% 6635 (A)
Turning radius, braked declared	14.1 ft · 4.30 m	11.5 ft · 3.50 m	+23% M 9086 a
Fuel tank declared	105.7 qt · 100.0 L	121.5 qt · 115.0 L	+15% 6635 (A)

Source

Source