Case-Steyr M 9078 (a) vs VALMET 865-2/865

10 material differences · fewer than 12

Tractor one

1994–2003

No measured PTO figure

Tractor two

1996–1997

No measured PTO figure

Which should you choose?

Read our verdict on the M 9078 (a) and the 865-2/865 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-Steyr M 9078 (a) and VALMET 865-2/865, field by field
Field	M 9078 (a)	865-2/865	Gap
Engine
Engine power, claimed claimed	77.0 hp	86 hp	+11% 865-2/865
Engine declared	Steyr-MWM WD 401.81	VALMET 420 DSR	differs
Displacement declared	4.16 L	3.30 L	+26% M 9078 (a)
Maximum torque declared	218 lb·ft · 295 N·m	229 lb·ft · 310 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Fichtel & Sachs double clutch	Dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	12.7 gpm · 48.1 L/min	15.1 gpm · 57.0 L/min	+19% 865-2/865
Pressure declared	3,481 psi · 240 bar	2,901 psi · 200 bar	+20% M 9078 (a)
Three-point lift at ends declared	9,480 lb · 4,300 kg	7,419 lb · 3,365 kg	+28% M 9078 (a)
Rear PTO speeds declared	430/540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	8,267 lb · 3,750 kg	7,033 lb · 3,190 kg	+18% M 9078 (a)
Maximum permissible mass declared	14,330 lb · 6,500 kg	—	—
Wheelbase declared	95.4 in · 2,424 mm	88.3 in · 2,244 mm	+8% M 9078 (a)
Length declared	156.7 in · 3,980 mm	151.3 in · 3,842 mm	—
Width declared	85.4 in · 2,170 mm	80.3 in · 2,040 mm	+6% M 9078 (a)
Height declared	100.4 in · 2,550 mm	102.8 in · 2,610 mm	—
Ground clearance declared	—	18.3 in · 465 mm	—
Turning radius, braked declared	—	11.8 ft · 3.60 m	—
Fuel tank declared	105.7 qt · 100.0 L	77.1 qt · 73.0 L	+37% M 9078 (a)

Source

Source