Case-Steyr M 9078 (a) vs Massey Ferguson MF 194 (A)

11 material differences · fewer than 12

Tractor one

1994–2003

No measured PTO figure

Tractor two

1980–1983

No measured PTO figure

Which should you choose?

Read our verdict on the M 9078 (a) and the MF 194 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Case-Steyr M 9078 (a) and Massey Ferguson MF 194 (A), field by field
Field	M 9078 (a)	MF 194 (A)	Gap
Engine
Engine power, claimed claimed	77.0 hp	74.0 hp	—
Engine declared	Steyr-MWM WD 401.81	Perkins A 4.248	differs
Displacement declared	4.16 L	4.07 L	—
Maximum torque declared	218 lb·ft · 295 N·m	212 lb·ft · 287 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch	—	—
Hydraulics & hitch
Pump flow declared	12.7 gpm · 48.1 L/min	7.1 gpm · 26.7 L/min	+80% M 9078 (a)
Pressure declared	3,481 psi · 240 bar	2,489 psi · 172 bar	+40% M 9078 (a)
Three-point lift at ends declared	9,480 lb · 4,300 kg	4,134 lb · 1,875 kg	+129% M 9078 (a)
Rear PTO speeds declared	430/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,267 lb · 3,750 kg	5,952 lb · 2,700 kg	+39% M 9078 (a)
Maximum permissible mass declared	14,330 lb · 6,500 kg	—	—
Wheelbase declared	95.4 in · 2,424 mm	90.2 in · 2,290 mm	+6% M 9078 (a)
Length declared	156.7 in · 3,980 mm	148.8 in · 3,780 mm	+5% M 9078 (a)
Width declared	85.4 in · 2,170 mm	—	—
Height declared	100.4 in · 2,550 mm	91.3 in · 2,320 mm	+10% M 9078 (a)
Turning radius, braked declared	—	12.0 ft · 3.65 m	—
Fuel tank declared	105.7 qt · 100.0 L	64.5 qt · 61.0 L	+64% M 9078 (a)

Source

Source