Case-Steyr M 9078 (a) vs Fiat 80-90 (DT)

11 material differences · fewer than 12

Tractor one

1994–2003

No measured PTO figure

Tractor two

1984–1992

No measured PTO figure

Which should you choose?

Read our verdict on the M 9078 (a) and the 80-90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-Steyr M 9078 (a) and Fiat 80-90 (DT), field by field
Field	M 9078 (a)	80-90 (DT)	Gap
Engine
Engine power, claimed claimed	77.0 hp	79.0 hp	—
Engine declared	Steyr-MWM WD 401.81	FIAT-IVECO 8045.05.205 or 305	differs
Displacement declared	4.16 L	3.91 L	+6% M 9078 (a)
Maximum torque declared	218 lb·ft · 295 N·m	185 lb·ft · 251 N·m	+18% M 9078 (a)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Fichtel & Sachs double clutch	dry VALEO, O.M.G. or LuK double clutch	differs
Hydraulics & hitch
Pump flow declared	12.7 gpm · 48.1 L/min	9.4 gpm · 35.5 L/min	+35% M 9078 (a)
Pressure declared	3,481 psi · 240 bar	3,046–3,118 psi · 210–215 bar	differs
Three-point lift at ends declared	9,480 lb · 4,300 kg	—	—
Rear PTO speeds declared	430/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,267 lb · 3,750 kg	6,834 lb · 3,100 kg	+21% M 9078 (a)
Maximum permissible mass declared	14,330 lb · 6,500 kg	11,684 lb · 5,300 kg	+23% M 9078 (a)
Wheelbase declared	95.4 in · 2,424 mm	92.2 in · 2,342 mm	—
Length declared	156.7 in · 3,980 mm	152.9 in · 3,884 mm	—
Width declared	85.4 in · 2,170 mm	76.0 in · 1,930 mm	+12% M 9078 (a)
Height declared	100.4 in · 2,550 mm	103.0 in · 2,615 mm	—
Ground clearance declared	—	19.9 in · 505 mm	—
Turning radius, braked declared	—	12.0 ft · 3.65 m	—
Fuel tank declared	105.7 qt · 100.0 L	98.3 qt · 93.0 L	+8% M 9078 (a)

Source

Source