Case-Steyr 9145 a or SAME Titan 145?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 9145 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Titan 145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Case-Steyr 9145a suits loader and hydraulic implement work better on this data: 15% (9.2 L/min / 2.4 gpm) more hydraulic flow.
  • The Case-Steyr 9145a suits road haulage better on this data: 12% (1,000 kg / 2,205 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-Steyr 9145 a and SAME Titan 145, with the call on each
Question9145 aTitan 145Call
Which puts more power through the PTO shaft?106.7 kW (143.1 hp)Traktorenlexikon, “Steyr 9145”106.6 kW (143.0 hp)Traktorenlexikon, “SAME Titan 145”Not comparableNot comparable on power at the PTO shaft: the 9145 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Titan 145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 9145 a and the Titan 145.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 9145 a and the Titan 145.
Which pumps more oil for implements?68.7 L/min (18.1 gpm)Traktorenlexikon, “Steyr 9145”59.5 L/min (15.7 gpm)Traktorenlexikon, “SAME Titan 145”AheadThe Case-Steyr 9145a has 15% more hydraulic flow (9.2 L/min / 2.4 gpm) than the SAME Titan 145 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?7,200 kg (15,873 lb)Traktorenlexikon, “Steyr 9145”7,000 kg (15,432 lb)Traktorenlexikon, “SAME Titan 145”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?5,285 kg (11,651 lb)Traktorenlexikon, “Steyr 9145”5,750 kg (12,677 lb)Traktorenlexikon, “SAME Titan 145”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?9,500 kg (20,944 lb)Traktorenlexikon, “Steyr 9145”8,500 kg (18,739 lb)Traktorenlexikon, “SAME Titan 145”AheadThe Case-Steyr 9145a has 12% higher maximum permissible mass (1,000 kg / 2,205 lb) than the SAME Titan 145 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?20 to 24Traktorenlexikon, “Steyr 9145”26 to 27Traktorenlexikon, “SAME Titan 145”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 9145 a and the Titan 145.
Which is faster on the road?30 km/h (18.6 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Steyr 9145”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “SAME Titan 145”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Steyr 9145”540/1000 rpmTraktorenlexikon, “SAME Titan 145”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “SAME Titan 145”No figureNo call on PTO independence: not stated for the 9145 a.
Which drives on both axles?4WDTraktorenlexikon, “Steyr 9145”4WDTraktorenlexikon, “SAME Titan 145”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–20031995–1998EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-Steyr 9145a has 15% more hydraulic flow (9.2 L/min / 2.4 gpm) than the SAME Titan 145 (both pump flow, as stated by the source).
  • The Case-Steyr 9145a has 12% higher maximum permissible mass (1,000 kg / 2,205 lb) than the SAME Titan 145 (both maximum permissible mass, as stated by the source).
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 9145 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Titan 145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources