10 material differences · fewer than 12
Tractor oneCase-Steyr 9145 a1995–2003No measured PTO figureTractor twoInternational Harvester 1455 XL1981–1996No measured PTO figure
Which should you choose?
Read our verdict on the 9145 a and the 1455 XL → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 9145 a | 1455 XL | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 143.1 hp | 143 hp | — |
| Engine declared | Steyr-VALMET WD 620.83 | IH DT-402 | differs |
| Displacement declared | 6.60 L | 6.59 L | — |
| Maximum torque declared | 415 lb·ft · 562 N·m | 390 lb·ft · 529 N·m | +6% 9145 a |
| Transmission | |||
| Top speed declared | 18.6–31.1 mph · 30–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal operated wet ZF multi-plate clutch | Dry dual clutch with additional Voith fluid coupling | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 18.1 gpm · 68.7 L/min | 13.2 gpm · 50.0 L/min | +37% 9145 a |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,651 lb · 5,285 kg | 14,154 lb · 6,420 kg | +21% 1455 XL |
| Maximum permissible mass declared | 20,944 lb · 9,500 kg | — | — |
| Wheelbase declared | 110.5 in · 2,806 mm | 110.2 in · 2,798 mm | — |
| Length declared | 194.1 in · 4,930 mm | 186.6 in · 4,740 mm | — |
| Width declared | 99.0 in · 2,515 mm | 95.0 in · 2,412 mm | — |
| Ground clearance declared | 21.3 in · 540 mm | 19.6 in · 499 mm | +8% 9145 a |
| Turning radius, braked declared | 16.4 ft · 5.01 m | 17.7 ft · 5.40 m | +8% 1455 XL |
| Fuel tank declared | 232.5 qt · 220.0 L | 211.3 qt · 200 L | +10% 9145 a |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-Steyr 9145 a sources
- Source: Traktorenlexikon, “Steyr 9145”
International Harvester 1455 XL sources
- Source: Traktorenlexikon, “IHC 1455XL”