Case-Steyr 9115 a or New Holland 8260?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 9115 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8260 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The New Holland 8260 suits loader and hydraulic implement work better on this data: 11% (9.0 L/min / 2.4 gpm) more hydraulic flow.
  • The Case-Steyr 9115 a suits road haulage better on this data: 13% (1,000 kg / 2,205 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-Steyr 9115 a and New Holland 8260, with the call on each
Question9115 a8260Call
Which puts more power through the PTO shaft?84.6 kW (113.5 hp)Traktorenlexikon, “Steyr 9115”84.6 kW (113.5 hp)Traktorenlexikon, “New Holland 8260”Not comparableNot comparable on power at the PTO shaft: the 9115 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8260 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 9115 a and the 8260.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 9115 a and the 8260.
Which pumps more oil for implements?84.3 L/min (22.3 gpm)Traktorenlexikon, “Steyr 9115”93.3 L/min (24.6 gpm)Traktorenlexikon, “New Holland 8260”AheadThe New Holland 8260 has 11% more hydraulic flow (9.0 L/min / 2.4 gpm) than the Case-Steyr 9115 a (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,900 kg (15,212 lb)Traktorenlexikon, “Steyr 9115”5,740 kg (12,655 lb)Traktorenlexikon, “New Holland 8260”Not comparableNot comparable on three-point lift: the 9115 a: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Steyr 9115”); the 8260: lift at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland 8260”) — not the same quantity, basis and condition.
Which is heavier, for traction?5,245 kg (11,563 lb)Traktorenlexikon, “Steyr 9115”5,290 kg (11,662 lb)Traktorenlexikon, “New Holland 8260”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?9,000 kg (19,842 lb)Traktorenlexikon, “Steyr 9115”8,000 kg (17,637 lb)Traktorenlexikon, “New Holland 8260”AheadThe Case-Steyr 9115 a has 13% higher maximum permissible mass (1,000 kg / 2,205 lb) than the New Holland 8260 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?20 to 24Traktorenlexikon, “Steyr 9115”18 to 24Traktorenlexikon, “New Holland 8260”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 9115 a and the 8260.
Which is faster on the road?30 km/h (18.6 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Steyr 9115”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland 8260”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Steyr 9115”540/1000 rpmTraktorenlexikon, “New Holland 8260”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Steyr 9115”independentTraktorenlexikon, “New Holland 8260”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Steyr 9115”4WDTraktorenlexikon, “New Holland 8260”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–20031996–1999EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland 8260 has 11% more hydraulic flow (9.0 L/min / 2.4 gpm) than the Case-Steyr 9115 a (both pump flow, as stated by the source).
  • The Case-Steyr 9115 a has 13% higher maximum permissible mass (1,000 kg / 2,205 lb) than the New Holland 8260 (both maximum permissible mass, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 9115 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8260 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 9115 a: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Steyr 9115”); the 8260: lift at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland 8260”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources