8 material differences · fewer than 12
Tractor oneCase-Steyr 9115 a1995–2003No measured PTO figureTractor twoFendt Favorit 511 C1994–1999No measured PTO figure
Which should you choose?
Read our verdict on the 9115 a and the Favorit 511 C → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 9115 a | Favorit 511 C | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 113.5 hp | 112.9 hp | — |
| Engine declared | Steyr-VALMET WD 620.84 | MWM D 226 | differs |
| Displacement declared | 6.60 L | 6.23 L | +6% 9115 a |
| Maximum torque declared | 330 lb·ft · 447 N·m | 336 lb·ft · 456 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–31.1 mph · 30–50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 22.3 gpm · 84.3 L/min | 27.5 gpm · 104.0 L/min | +23% Favorit 511 C |
| Pressure declared | 3,481 psi · 240 bar | 2,901 psi · 200 bar | +20% 9115 a |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,563 lb · 5,245 kg | 11,684 lb · 5,300 kg | — |
| Maximum permissible mass declared | 19,842 lb · 9,000 kg | — | — |
| Wheelbase declared | 110.5 in · 2,806 mm | 101.9 in · 2,589 mm | +8% 9115 a |
| Length declared | 188.6 in · 4,790 mm | 174.6 in · 4,435 mm | +8% 9115 a |
| Width declared | 96.5 in · 2,450 mm | 93.7 in · 2,380 mm | — |
| Ground clearance declared | 17.7 in · 450 mm | 21.1 in · 536 mm | +19% Favorit 511 C |
| Turning radius, braked declared | — | 14.4 ft · 4.40 m | — |
| Fuel tank declared | 232.5 qt · 220.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-Steyr 9115 a sources
- Source: Traktorenlexikon, “Steyr 9115”
Fendt Favorit 511 C sources
- Source: Traktorenlexikon, “Fendt Favorit 511 C”