Case-Steyr 9115 a vs Deutz-Fahr Agrotron 6.20
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the 9115 a and the Agrotron 6.20 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 9115 a | Agrotron 6.20 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 113.5 hp | 113.5 hp | — |
| Engine declared | Steyr-VALMET WD 620.84 | Deutz BF6M 1013 E | differs |
| Displacement declared | 6.60 L | 7.15 L | +8% Agrotron 6.20 |
| Maximum torque declared | 330 lb·ft · 447 N·m | 340 lb·ft · 461 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–31.1 mph · 30–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 22.3 gpm · 84.3 L/min | 21.9 gpm · 82.8 L/min | — |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Three-point lift at ends declared | — | 20,371 lb · 9,240 kg | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,563 lb · 5,245 kg | 11,817 lb · 5,360 kg | — |
| Maximum permissible mass declared | 19,842 lb · 9,000 kg | — | — |
| Wheelbase declared | 110.5 in · 2,806 mm | 108.9 in · 2,767 mm | — |
| Length declared | 188.6 in · 4,790 mm | 184.3 in · 4,680 mm | — |
| Width declared | 96.5 in · 2,450 mm | 79.1 in · 2,008 mm | +22% 9115 a |
| Height declared | 112.2 in · 2,850 mm | 116.3 in · 2,955 mm | — |
| Ground clearance declared | 17.7 in · 450 mm | 22.8 in · 580 mm | +29% Agrotron 6.20 |
| Fuel tank declared | 232.5 qt · 220.0 L | 285.3 qt · 270 L | +23% Agrotron 6.20 |
Case-Steyr 9115 a sources
Source
- Source: Traktorenlexikon, “Steyr 9115”
Deutz-Fahr Agrotron 6.20 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 6.20”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”