CASE-INTERNATIONAL 685 (DT) vs Renault Ceres 75 X (A)

8 material differences · fewer than 12

Tractor one

1985–1990

No measured PTO figure

Tractor two

1994–1998

No measured PTO figure

Which should you choose?

Read our verdict on the 685 (DT) and the Ceres 75 X (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 685 (DT) and Renault Ceres 75 X (A), field by field
Field	685 (DT)	Ceres 75 X (A)	Gap
Engine
Engine power, claimed claimed	68.0 hp	64.1 hp	+6% 685 (DT)
Engine declared	IHC D-239	JOHN DEERE 4039 DRT 35	differs
Displacement declared	3.91 L	3.92 L	—
Maximum torque declared	176 lb·ft · 238 N·m	169 lb·ft · 229 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry single-plate clutch, designed as drive clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Three-point lift at ends declared	5,247 lb · 2,380 kg	6,327 lb · 2,870 kg	+21% Ceres 75 X (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,836 lb · 2,647 kg	6,967 lb · 3,160 kg	+19% Ceres 75 X (A)
Maximum permissible mass declared	—	11,684 lb · 5,300 kg	—
Wheelbase declared	84.5 in · 2,146 mm	94.8–95.7 in · 2,407–2,430 mm	differs
Length declared	141.6 in · 3,597 mm	156.7 in · 3,979 mm	+11% Ceres 75 X (A)
Width declared	72.4 in · 1,840 mm	73.2 in · 1,860 mm	—
Height declared	96.5 in · 2,451 mm	99.2 in · 2,520 mm	—
Ground clearance declared	—	16.9 in · 430 mm	—
Turning radius, braked declared	10.3 ft · 3.15 m	12.5 ft · 3.80 m	+21% Ceres 75 X (A)
Fuel tank declared	118.3 qt · 112.0 L	121.5 qt · 115.0 L	—

Source

Source