7 material differences · fewer than 12
Tractor oneCASE-INTERNATIONAL 585 (DT)1985–1990No measured PTO figureTractor twoWHITE 2-601976–1980No measured PTO figure
Which should you choose?
Read our verdict on the 585 (DT) and the 2-60 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 585 (DT) | 2-60 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.1 hp | 59.1 hp | — |
| Engine declared | IHC D-206 | FIAT-IVECO 8045.02.200 | differs |
| Displacement declared | 3.38 L | 3.46 L | — |
| Maximum torque declared | 162 lb·ft · 220 N·m | 147 lb·ft · 199 N·m | +11% 585 (DT) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal operated dry Laycock single disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 15.1 gpm · 57.2 L/min | 5.8 gpm · 21.8 L/min | +162% 585 (DT) |
| Pressure declared | — | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,639 lb · 2,558 kg | 5,161 lb · 2,341 kg | +9% 585 (DT) |
| Wheelbase declared | 78.0 in · 1,981 mm | 81.3 in · 2,065 mm | — |
| Length declared | 141.6 in · 3,597 mm | 126.0 in · 3,200 mm | +12% 585 (DT) |
| Width declared | 73.2 in · 1,859 mm | 72.8 in · 1,850 mm | — |
| Ground clearance declared | — | 20.0 in · 508 mm | — |
| Turning radius, braked declared | 11.7 ft · 3.56 m | 11.2 ft · 3.40 m | — |
| Fuel tank declared | 80.0 qt · 75.7 L | 57.1 qt · 54.0 L | +40% 585 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
CASE-INTERNATIONAL 585 (DT) sources
- Source: Traktorenlexikon, “Case-IH 585”
- Source: Traktorenlexikon, “Case-IH 3230”
WHITE 2-60 sources
- Source: Traktorenlexikon, “White 2-60”
- Source: Traktorenlexikon, “Someca 600”