8 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 585 (DT)1985–1990No measured PTO figureTractor twoSAME Explorer 60 (DT)1986–1990No measured PTO figure

Which should you choose?

Read our verdict on the 585 (DT) and the Explorer 60 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 585 (DT) and SAME Explorer 60 (DT), field by field
Field	585 (DT)	Explorer 60 (DT)	Gap
Engine
Engine power, claimed claimed	59.1 hp	59.1 hp	—
Engine declared	IHC D-206	SAME 1000.3 A	differs
Displacement declared	3.38 L	3.00 L	+13% 585 (DT)
Maximum torque declared	162 lb·ft · 220 N·m	144 lb·ft · 195 N·m	+13% 585 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal operated dry Laycock single disc clutch	Pedal-operated dry SAME single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	15.1 gpm · 57.2 L/min	—	—
Pressure declared	—	3,046 psi · 210 bar	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,639 lb · 2,558 kg	5,600 lb · 2,540 kg	—
Wheelbase declared	78.0 in · 1,981 mm	86.4 in · 2,195 mm	+11% Explorer 60 (DT)
Length declared	141.6 in · 3,597 mm	138.6 in · 3,520 mm	—
Width declared	73.2 in · 1,859 mm	72.0–95.6 in · 1,828–2,428 mm	differs
Height, over the cab declared	96.5 in · 2,451 mm	95.9 in · 2,437 mm	—
Ground clearance declared	—	17.1 in · 435 mm	—
Turning radius, braked declared	11.7 ft · 3.56 m	9.1 ft · 2.78 m	+28% 585 (DT)
Fuel tank declared	80.0 qt · 75.7 L	70.8 qt · 67.0 L	+13% 585 (DT)

Source

Source