10 material differences · fewer than 12
Tractor oneCASE-INTERNATIONAL 585 (DT)1985–1990No measured PTO figureTractor twoLamborghini R 683 (DT)1982–1985No measured PTO figure
Which should you choose?
Read our verdict on the 585 (DT) and the R 683 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 585 (DT) | R 683 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.1 hp | 59.1 hp | — |
| Engine declared | IHC D-206 | SAME 1.053 P | differs |
| Displacement declared | 3.38 L | 3.12 L | +9% 585 (DT) |
| Maximum torque declared | 162 lb·ft · 220 N·m | 161 lb·ft · 218 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal operated dry Laycock single disc clutch | Dry VALEO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 15.1 gpm · 57.2 L/min | 8.2 gpm · 31.0 L/min | +85% 585 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,639 lb · 2,558 kg | 4,938 lb · 2,240 kg | +14% 585 (DT) |
| Wheelbase declared | 78.0 in · 1,981 mm | 81.4 in · 2,068 mm | — |
| Length declared | 141.6 in · 3,597 mm | 132.4 in · 3,364 mm | +7% 585 (DT) |
| Width declared | 73.2 in · 1,859 mm | 67.9 in · 1,725 mm | +8% 585 (DT) |
| Ground clearance declared | — | 20.5 in · 520 mm | — |
| Turning radius, braked declared | 11.7 ft · 3.56 m | — | — |
| Fuel tank declared | 80.0 qt · 75.7 L | 63.4 qt · 60.0 L | +26% 585 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
CASE-INTERNATIONAL 585 (DT) sources
- Source: Traktorenlexikon, “Case-IH 585”
- Source: Traktorenlexikon, “Case-IH 3230”
Lamborghini R 683 (DT) sources
- Source: Traktorenlexikon, “Lamborghini 683 DT”
- Source: Traktorenlexikon, “SAME Solar 60”