CASE-INTERNATIONAL 585 (DT) vs IMT 577 (DV)

11 material differences · fewer than 12

Tractor one

1985–1990

No measured PTO figure

Tractor two

1981–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 585 (DT) and the 577 (DV) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 585 (DT) and IMT 577 (DV), field by field
Field	585 (DT)	577 (DV)	Gap
Engine
Engine power, claimed claimed	59.1 hp	69.1 hp	+17% 577 (DV)
Engine declared	IHC D-206	IMR-PERKINS S-44 A/T (A 4.248)	differs
Displacement declared	3.38 L	4.07 L	+20% 577 (DV)
Maximum torque declared	162 lb·ft · 220 N·m	194 lb·ft · 263 N·m	+20% 577 (DV)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal operated dry Laycock single disc clutch	Pedal operated dry two stage KRON NOVI double clutch	differs
Hydraulics & hitch
Pump flow declared	—	5.9 gpm · 22.3 L/min	—
Three-point lift at ends declared	4,409 lb · 2,000 kg	5,622 lb · 2,550 kg	+28% 577 (DV)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,639 lb · 2,558 kg	6,482 lb · 2,940 kg	+15% 577 (DV)
Wheelbase declared	78.0 in · 1,981 mm	87.2 in · 2,215 mm	+12% 577 (DV)
Length declared	141.6 in · 3,597 mm	144.5 in · 3,670 mm	—
Width declared	73.2 in · 1,859 mm	68.9 in · 1,750 mm	+6% 585 (DT)
Height declared	96.5 in · 2,451 mm	96.5 in · 2,450 mm	—
Ground clearance declared	—	18.9 in · 480 mm	—
Turning radius, braked declared	11.7 ft · 3.56 m	14.1 ft · 4.29 m	+21% 577 (DV)
Fuel tank declared	80.0 qt · 75.7 L	95.1 qt · 90.0 L	+19% 577 (DV)

Source

Source