9 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 585 (DT)1985–1990No measured PTO figureTractor twoHürlimann H-358 "Prestige"1989–1998No measured PTO figure

Which should you choose?

Read our verdict on the 585 (DT) and the H-358 "Prestige" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 585 (DT) and Hürlimann H-358 "Prestige", field by field
Field	585 (DT)	H-358 "Prestige"	Gap
Engine
Engine power, claimed claimed	59.1 hp	59.1 hp	—
Engine declared	IHC D-206	Hürlimann H-1000.3 W	differs
Displacement declared	3.38 L	3.00 L	+13% 585 (DT)
Maximum torque declared	162 lb·ft · 220 N·m	149 lb·ft · 202 N·m	+9% 585 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal operated dry Laycock single disc clutch	Pedal-operated dry SLH single-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	15.1 gpm · 57.2 L/min	7.5 gpm · 28.5 L/min	+101% 585 (DT)
Pressure declared	—	3,046 psi · 210 bar	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,639 lb · 2,558 kg	6,118 lb · 2,775 kg	+8% H-358 "Prestige"
Wheelbase declared	78.0 in · 1,981 mm	83.9 in · 2,130 mm	+8% H-358 "Prestige"
Length declared	141.6 in · 3,597 mm	148.0 in · 3,760 mm	—
Width declared	73.2 in · 1,859 mm	70.5–93.7 in · 1,790–2,380 mm	differs
Height, over the cab declared	96.5 in · 2,451 mm	100.0 in · 2,540 mm	—
Ground clearance declared	—	15.4 in · 390 mm	—
Turning radius, braked declared	11.7 ft · 3.56 m	—	—
Fuel tank declared	80.0 qt · 75.7 L	74.0 qt · 70.0 L	+8% 585 (DT)

Source

Source