CASE-INTERNATIONAL 585 (DT) vs Fiat TN-65 D (DT)

11 material differences · fewer than 12

Tractor one

1985–1990

No measured PTO figure

Tractor two

1999–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 585 (DT) and the TN-65 D (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 585 (DT) and Fiat TN-65 D (DT), field by field
Field	585 (DT)	TN-65 D (DT)	Gap
Engine
Engine power, claimed claimed	59.1 hp	59.3 hp	—
Engine declared	IHC D-206	New Holland-Iveco 8035.05 R	differs
Displacement declared	3.38 L	2.93 L	+15% 585 (DT)
Maximum torque declared	162 lb·ft · 220 N·m	152 lb·ft · 206 N·m	+7% 585 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated dry Laycock single disc clutch	—	—
Hydraulics & hitch
Pressure declared	—	2,466 psi · 170 bar	—
Three-point lift at ends declared	4,409 lb · 2,000 kg	5,886 lb · 2,670 kg	+34% TN-65 D (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,639 lb · 2,558 kg	6,746 lb · 3,060 kg	+20% TN-65 D (DT)
Maximum permissible mass declared	—	9,700 lb · 4,400 kg	—
Wheelbase declared	78.0 in · 1,981 mm	83.9 in · 2,130 mm	+8% TN-65 D (DT)
Length declared	141.6 in · 3,597 mm	156.7 in · 3,980 mm	+11% TN-65 D (DT)
Width declared	73.2 in · 1,859 mm	85.0 in · 2,158 mm	+16% TN-65 D (DT)
Height declared	96.5 in · 2,451 mm	94.5 in · 2,400 mm	—
Ground clearance declared	—	15.0 in · 380 mm	—
Turning radius, braked declared	11.7 ft · 3.56 m	10.5 ft · 3.20 m	+11% 585 (DT)
Fuel tank declared	80.0 qt · 75.7 L	74.0 qt · 70.0 L	+8% 585 (DT)

Source

Source