CASE-INTERNATIONAL 485 (DT) vs Massey Ferguson MF 154 (A)

9 material differences · fewer than 12

Tractor one

1985–1990

No measured PTO figure

Tractor two

1973–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 485 (DT) and the MF 154 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 485 (DT) and Massey Ferguson MF 154 (A), field by field
Field	485 (DT)	MF 154 (A)	Gap
Engine
Engine power, claimed claimed	51.2 hp	50.0 hp	—
Engine declared	IHC D-179	Perkins AD 3.152 S	differs
Displacement declared	2.93 L	2.50 L	+17% 485 (DT)
Maximum torque declared	121 lb·ft · 164 N·m	127 lb·ft · 173 N·m	+5% MF 154 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 485 (DT)
Clutch declared	pedal-operated dry Laycock single-plate clutch, type 11 inches, designed as driving clutch	Pedal operated dry and air cooled LUK double clutch	differs
Hydraulics & hitch
Pump flow declared	—	7.1 gpm · 27.0 L/min	—
Pressure declared	—	2,418 psi · 166.7 bar	—
Three-point lift at ends declared	3,439 lb · 1,560 kg	3,362 lb · 1,525 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,199 lb · 2,358 kg	4,475 lb · 2,030 kg	+16% 485 (DT)
Wheelbase declared	79.6 in · 2,022 mm	81.9 in · 2,080 mm	—
Length declared	139.2 in · 3,535 mm	138.6 in · 3,520 mm	—
Width declared	72.4 in · 1,840 mm	—	—
Height declared	90.9 in · 2,310 mm	61.4 in · 1,560 mm	+48% 485 (DT)
Ground clearance declared	9.3 in · 236 mm	12.6 in · 320 mm	+36% MF 154 (A)
Turning radius, braked declared	11.1 ft · 3.38 m	10.9 ft · 3.31 m	—
Fuel tank declared	80.0 qt · 75.7 L	65.5 qt · 62.0 L	+22% 485 (DT)

Source

Source