CASE-INTERNATIONAL 485 (DT) vs John Deere 5200 (A)

8 material differences · fewer than 12

Tractor one

1985–1990

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 485 (DT) and the 5200 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 485 (DT) and John Deere 5200 (A), field by field
Field	485 (DT)	5200 (A)	Gap
Engine
Engine power, claimed claimed	51.2 hp	39.4 hp	+30% 485 (DT)
Engine declared	IHC D-179	John Deere 3.029	differs
Displacement declared	2.93 L	2.94 L	—
Maximum torque declared	121 lb·ft · 164 N·m	115 lb·ft · 156 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	pedal-operated dry Laycock single-plate clutch, type 11 inches, designed as driving clutch	Pedal-operated dry CARRARO single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	11.8 gpm · 44.7 L/min	—
Pressure declared	—	3,408 psi · 235 bar	—
Three-point lift at ends declared	3,439 lb · 1,560 kg	3,803 lb · 1,725 kg	+11% 5200 (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,199 lb · 2,358 kg	4,248 lb · 1,927 kg	+22% 485 (DT)
Wheelbase declared	79.6 in · 2,022 mm	80.7 in · 2,050 mm	—
Length declared	139.2 in · 3,535 mm	139.4 in · 3,541 mm	—
Width declared	72.4 in · 1,840 mm	72.7 in · 1,846 mm	—
Height declared	90.9 in · 2,310 mm	90.1 in · 2,289 mm	—
Ground clearance declared	9.3 in · 236 mm	19.3 in · 490 mm	+108% 5200 (A)
Turning radius, braked declared	11.1 ft · 3.38 m	9.8 ft · 3.00 m	+13% 485 (DT)
Fuel tank declared	80.0 qt · 75.7 L	72.0 qt · 68.1 L	+11% 485 (DT)

Source

Source