8 material differences · fewer than 12
Tractor oneCase-IH STX 4402000–2002No measured PTO figureTractor twoNew Holland T 90402007–2010No measured PTO figure
Which should you choose?
Read our verdict on the STX 440 and the T 9040 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | STX 440 | T 9040 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 434.0 hp | 429.0 hp | — |
| Engine declared | CUMMINS QSX-15 | CUMMINS Cursor-13 | differs |
| Displacement declared | 14.95 L | 12.88 L | +16% STX 440 |
| Maximum torque declared | 1,583 lb·ft · 2,146 N·m | 1,465 lb·ft · 1,986 N·m | +8% STX 440 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Multi-disc clutch running in an oil bath | Electro-hydraulically operated wet multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 41.0 gpm · 155.2 L/min | 40.6 gpm · 153.7 L/min | — |
| Pressure declared | 3,002 psi · 207 bar | 3,336 psi · 230 bar | +11% T 9040 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 39,500 lb · 17,917 kg | 41,780 lb · 18,951 kg | +6% T 9040 |
| Maximum permissible mass declared | 39,683 lb · 18,000 kg | 51,599 lb · 23,405 kg | +30% T 9040 |
| Wheelbase declared | 154.0 in · 3,911 mm | 154.0 in · 3,911 mm | — |
| Length declared | 297.6 in · 7,558 mm | 297.6 in · 7,558 mm | — |
| Width declared | 153.0 in · 3,886 mm | 120.1 in · 3,050 mm | +27% STX 440 |
| Fuel tank declared | 1,200.4 qt · 1,136.0 L | 1,202.5 qt · 1,138.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH STX 440 sources
- Source: Traktorenlexikon, “Case-IH STX 440”
- Source: Traktorenlexikon, “New Holland TJ375”
- Source: OECD test report 1957, 2001
New Holland T 9040 sources
- Source: Traktorenlexikon, “New Holland T9040”
- Source: Traktorenlexikon, “New Holland T9030”