Case-IH STX 375 or New Holland 9682 (Traktorenlexikon)?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland 9682: hydraulic flow.
- The New Holland 9682 suits loader and hydraulic implement work better on this data: 16% (24.0 L/min / 6.3 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | STX 375 | 9682 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 252.0 kW (337.9 hp)Traktorenlexikon, “Case-IH STX 375” | 238.4 kW (319.7 hp)Traktorenlexikon, “New Holland 9682” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the STX 375 and the 9682. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the STX 375 and the 9682. |
| Which pumps more oil for implements? | 154.8 L/min (40.9 gpm)Traktorenlexikon, “Case-IH STX 375” | 178.8 L/min (47.2 gpm)Traktorenlexikon, “New Holland 9682” | AheadThe New Holland 9682 has 16% more hydraulic flow (24.0 L/min / 6.3 gpm) than the Case-IH STX 375 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 8,845 kg (19,500 lb)Traktorenlexikon, “Case-IH STX 375” | 9,170 kg (20,216 lb)Traktorenlexikon, “New Holland 9682” | Not comparableNot comparable on three-point lift: the STX 375: lift through the full range 610 mm behind the ends, as stated by the source (Traktorenlexikon, “Case-IH STX 375”); the 9682: lift at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland 9682”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 17,064 kg (37,620 lb)Traktorenlexikon, “Case-IH STX 375” | 14,528 kg (32,029 lb)Traktorenlexikon, “New Holland 9682” | Ahead (a fact, not an advantage)The Case-IH STX 375 is 17% heavier (2,536 kg / 5,591 lb) than the New Holland 9682 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 18,000 kg (39,683 lb)Traktorenlexikon, “Case-IH STX 375” | 17,236 kg (37,999 lb)Traktorenlexikon, “New Holland 9682” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 17Traktorenlexikon, “Case-IH STX 375” | 12Traktorenlexikon, “New Holland 9682” | Sources disagreeNo call on forward gears: sources disagree on the figure for the STX 375. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the STX 375 and the 9682. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Case-IH STX 375” | 30 km/h (18.6 mph)Traktorenlexikon, “New Holland 9682” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “Case-IH STX 375” | 1000 rpmTraktorenlexikon, “New Holland 9682” | Sources disagreeNo call on PTO speeds: sources disagree on the PTO speeds of the STX 375. |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the STX 375 and the 9682. |
| Which drives on both axles? | 4WD / 4WD, equal wheelsTraktorenlexikon, “Case-IH STX 375”; OECD test report 1955, 2001 | 4WDTraktorenlexikon, “New Holland 9682” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2000–2005 | 1995–1999 | Ahead (a fact, not an advantage)The Case-IH STX 375 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland 9682 has 16% more hydraulic flow (24.0 L/min / 6.3 gpm) than the Case-IH STX 375 (both pump flow, as stated by the source).
- The Case-IH STX 375 is 17% heavier (2,536 kg / 5,591 lb) than the New Holland 9682 (both unladen weight, as stated by the source).
- The Case-IH STX 375 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on three-point lift: the STX 375: lift through the full range 610 mm behind the ends, as stated by the source (Traktorenlexikon, “Case-IH STX 375”); the 9682: lift at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland 9682”) — not the same quantity, basis and condition.
- No call on forward gears: sources disagree on the figure for the STX 375.
- No call on PTO speeds: sources disagree on the PTO speeds of the STX 375.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources