8 material differences · fewer than 12
Tractor oneCase-IH STX 3752000–2005No measured PTO figureTractor twoJohn Deere 89601989–1993No measured PTO figure
Which should you choose?
Read our verdict on the STX 375 and the 8960 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | STX 375 | 8960 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 369.9 hp | 365.2 hp | — |
| Engine declared | CUMMINS QSX-15 | Cummins NTA 855 A 370 | differs |
| Displacement declared | 14.95 L | 14.01 L | +7% STX 375 |
| Maximum torque declared | 1,325 lb·ft · 1,797 N·m | 1,279 lb·ft · 1,734 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal-operated hydraulic and oil-cooled double disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Pump flow declared | 40.9 gpm · 154.8 L/min | — | — |
| Pressure declared | 2,698 psi · 186 bar | 2,857–3,162 psi · 197–218 bar | differs |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 37,620 lb · 17,064 kg | 35,109 lb · 15,925 kg | +7% STX 375 |
| Maximum permissible mass declared | 39,683 lb · 18,000 kg | — | — |
| Wheelbase declared | 154.0 in · 3,911 mm | 133.9 in · 3,400 mm | +15% STX 375 |
| Length declared | 297.6 in · 7,558 mm | 286.1 in · 7,266 mm | — |
| Width declared | 153.0 in · 3,886 mm | 152.4–165.0 in · 3,870–4,190 mm | differs |
| Ground clearance declared | — | 14.9 in · 378 mm | — |
| Fuel tank declared | 1,200.4 qt · 1,136.0 L | 882.3 qt · 835.0 L | +36% STX 375 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH STX 375 sources
- Source: Traktorenlexikon, “Case-IH STX 375”
- Source: Traktorenlexikon, “New Holland TJ375”
- Source: OECD test report 1955, 2002
John Deere 8960 sources
- Source: Traktorenlexikon, “John Deere 8960”