Case-IH STX 325 vs New Holland TJ-330
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the STX 325 and the TJ-330 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | STX 325 | TJ-330 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 321 hp | 325.5 hp | — |
| Engine declared | CUMMINS 6 TAA-9304 | CUMMINS 6 TAA-9004 | differs |
| Displacement declared | 8.85 L | 8.85 L | — |
| Maximum torque declared | 1,062 lb·ft · 1,440 N·m | 1,077 lb·ft · 1,460 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 40.9 gpm · 154.8 L/min | 40.6 gpm · 153.7 L/min | — |
| Pressure declared | 2,698 psi · 186 bar | 3,263 psi · 225 bar | +21% TJ-330 |
| Three-point lift at ends declared | 19,335 lb · 8,770 kg | 15,673 lb · 7,109 kg | +23% STX 325 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 31,934 lb · 14,485 kg | 32,296 lb · 14,649 kg | — |
| Maximum permissible mass declared | 39,022 lb · 17,700 kg | — | — |
| Wheelbase declared | 139.0 in · 3,531 mm | 154.0 in · 3,911 mm | +11% TJ-330 |
| Length declared | 276.0 in · 7,010 mm | 297.6 in · 7,558 mm | +8% TJ-330 |
| Width declared | 120.0 in · 3,048 mm | 145.0 in · 3,683 mm | +21% TJ-330 |
| Height declared | 137.0 in · 3,480 mm | 143.0 in · 3,631 mm | — |
| Turning radius, braked declared | — | 15.1 ft · 4.60 m | — |
| Fuel tank declared | 799.9 qt · 757.0 L | 799.9 qt · 757.0 L | — |
Case-IH STX 325 sources
Source
- Source: Traktorenlexikon, “Case-IH STX 325”
- Source: Traktorenlexikon, “New Holland TJ325”
New Holland TJ-330 sources
Source
- Source: Traktorenlexikon, “New Holland TJ330”