Case-IH STX 325 or New Holland 9482 (Traktorenlexikon)?

Which should you choose?

On performance, every comparable figure that differs favours the Case-IH STX 325: maximum permissible mass. It is also ahead on forward gears.

  • The Case-IH STX 325 suits road haulage better on this data: 15% (2,278 kg / 5,022 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH STX 325 and New Holland 9482 (Traktorenlexikon), with the call on each
QuestionSTX 3259482Call
Which puts more power through the PTO shaft?217.6 kW (291.8 hp)Traktorenlexikon, “Case-IH STX 325”204.1 kW (273.7 hp)Traktorenlexikon, “New Holland 9482”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the STX 325 and the 9482.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the STX 325 and the 9482.
Which pumps more oil for implements?154.8 L/min (40.9 gpm)Traktorenlexikon, “Case-IH STX 325”168.8 L/min (44.6 gpm)Traktorenlexikon, “New Holland 9482”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?8,770 kg (19,335 lb)Traktorenlexikon, “Case-IH STX 325”No figureNo call on three-point lift: no figure on record for the 9482.
Which is heavier, for traction?14,485 kg (31,934 lb)Traktorenlexikon, “Case-IH STX 325”13,683 kg (30,166 lb)Traktorenlexikon, “New Holland 9482”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?17,700 kg (39,022 lb)Traktorenlexikon, “Case-IH STX 325”15,422 kg (34,000 lb)Traktorenlexikon, “New Holland 9482”AheadThe Case-IH STX 325 has 15% higher maximum permissible mass (2,278 kg / 5,022 lb) than the New Holland 9482 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?17Traktorenlexikon, “Case-IH STX 325”12Traktorenlexikon, “New Holland 9482”AheadThe Case-IH STX 325 has 42% more forward gears (5 gears) than the New Holland 9482 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the STX 325 and the 9482.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Case-IH STX 325”30 km/h (18.6 mph)Traktorenlexikon, “New Holland 9482”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Case-IH STX 325”1000 rpmTraktorenlexikon, “New Holland 9482”EvenEven on PTO speeds: the same speeds (1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the STX 325 and the 9482.
Which drives on both axles?4WDTraktorenlexikon, “Case-IH STX 325”4WDTraktorenlexikon, “New Holland 9482”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2000–20051995–1999Ahead (a fact, not an advantage)The Case-IH STX 325 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-IH STX 325 has 15% higher maximum permissible mass (2,278 kg / 5,022 lb) than the New Holland 9482 (both maximum permissible mass, as stated by the source).
  • The Case-IH STX 325 has 42% more forward gears (5 gears) than the New Holland 9482 (both forward gears, as stated by the source).
  • The Case-IH STX 325 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources