7 material differences · fewer than 12
Tractor oneCase-IH STX 2752000–2005No measured PTO figureTractor twoJohn Deere 87601989–1993No measured PTO figure
Which should you choose?
Read our verdict on the STX 275 and the 8760 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | STX 275 | 8760 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 271.3 hp | 296.1 hp | +9% 8760 |
| Engine declared | CUMMINS 6 TAA-8304 | John Deere 6.101 HRW-02 | differs |
| Displacement declared | 8.27 L | 10.14 L | +23% 8760 |
| Maximum torque declared | 954 lb·ft · 1,293 N·m | 904 lb·ft · 1,225 N·m | +6% STX 275 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–21.7 mph · 30–35 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | 58.0 gpm · 219.6 L/min | — | — |
| Pressure declared | 2,698 psi · 186 bar | 2,538 psi · 175 bar | +6% STX 275 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 31,795 lb · 14,422 kg | 32,088 lb · 14,555 kg | — |
| Maximum permissible mass declared | 33,069 lb · 15,000 kg | — | — |
| Wheelbase declared | 139.0 in · 3,531 mm | 133.9 in · 3,400 mm | — |
| Length declared | 276.0 in · 7,010 mm | 286.1 in · 7,266 mm | — |
| Width declared | 120.0–152.0 in · 3,048–3,861 mm | 139.8–150.6 in · 3,550–3,825 mm | differs |
| Height, over the cab declared | 137.0 in · 3,480 mm | 137.0 in · 3,480 mm | — |
| Ground clearance declared | — | 13.9 in · 353 mm | — |
| Fuel tank declared | 799.9 qt · 757.0 L | 882.3 qt · 835.0 L | +10% 8760 |
Case-IH STX 275 sources
Source
- Source: Traktorenlexikon, “Case-IH STX 275”
- Source: Traktorenlexikon, “Case-IH MX255”
John Deere 8760 sources
Source
- Source: Traktorenlexikon, “John Deere 8760”