6 material differences · fewer than 12

Tractor oneCase-IH Puma 1652007–2011No measured PTO figureTractor twoNew Holland T 70302007–2011No measured PTO figure

Which should you choose?

Read our verdict on the Puma 165 and the T 7030 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 9 fields identical or within 5%, which is not counted as material

Case-IH Puma 165 and New Holland T 7030, field by field
FieldPuma 165T 7030Gap
Engine
Engine power, claimed claimed164.7 hp164.7 hp—
Engine declared—IVECO-NEF 667 TA/EBN (TIER-III)—
Displacement declared—6.73 L—
Maximum torque declared540 lb·ft · 731.8 N·m540 lb·ft · 732 N·m—
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h24.9–31.1 mph · 40–50 km/h—
Clutch declaredelectrohydraulically operated wet Case-New Holland multi-plate driving clutchElectro-hydraulically operated wet Case-New Holland multi-disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredClosed centre——
Hydraulic control declaredLoad sensing——
Pump flow declared39.1 gpm · 148.1 L/min32.0 gpm · 121.0 L/min+22% Puma 165
Pressure declared2,756 psi · 190 bar3,336 psi · 230 bar+21% T 7030
Rear PTO speeds declared540E/1000 rpm540/540E/1000 rpmdiffers
Weight & dimensions
Unladen weight declared17,891 lb · 8,115 kg17,891 lb · 8,115 kg—
Maximum permissible mass declared26,455 lb · 12,000 kg26,455 lb · 12,000 kg—
Wheelbase declared113.5 in · 2,884 mm113.5 in · 2,884 mm—
Length declared193.5 in · 4,916 mm201.2 in · 5,110 mm—
Width declared85.2–114.2 in · 2,165–2,900 mm84.1–133.7 in · 2,135–3,395 mmdiffers
Height, over the cab declared119.7 in · 3,040 mm120.1 in · 3,050 mm—
Ground clearance declared18.7 in · 475 mm17.7 in · 450 mm+6% Puma 165
Fuel tank declared433.2 qt · 410.0 L428.0 qt · 405.0 L—

Case-IH Puma 165 sources

Source
  • Source: Traktorenlexikon, “Case-IH Puma 165”
  • Source: OECD test report 2410, 2008

New Holland T 7030 sources

Source
  • Source: Traktorenlexikon, “New Holland T7030 Power Command”