Case-IH Puma 140 or Deutz-Fahr Agrosun 140?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Puma 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrosun 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Case-IH Puma 140 suits loader and hydraulic implement work better on this data: 81% (51.6 L/min / 13.6 gpm) more hydraulic flow.
  • The Case-IH Puma 140 suits road haulage better on this data: 24% (2,000 kg / 4,409 lb) more maximum permissible mass and 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH Puma 140 and Deutz-Fahr Agrosun 140, with the call on each
QuestionPuma 140Agrosun 140Call
Which puts more power through the PTO shaft?104.4 kW (140.0 hp)Traktorenlexikon, “Case-IH Puma 140”103.1 kW (138.3 hp)Traktorenlexikon, “Deutz-Fahr Agrosun 140”Not comparableNot comparable on power at the PTO shaft: the Puma 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrosun 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Puma 140 and the Agrosun 140.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Puma 140 and the Agrosun 140.
Which pumps more oil for implements?115.6 L/min (30.5 gpm)Traktorenlexikon, “Case-IH Puma 140”64.0 L/min (16.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrosun 140”AheadThe Case-IH Puma 140 has 81% more hydraulic flow (51.6 L/min / 13.6 gpm) than the Deutz-Fahr Agrosun 140 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,400 kg (11,905 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 140”No figureNo call on three-point lift: no figure on record for the Puma 140.
Which is heavier, for traction?6,300 kg (13,889 lb)Traktorenlexikon, “Case-IH Puma 140”5,090 kg (11,222 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 140”Ahead (a fact, not an advantage)The Case-IH Puma 140 is 24% heavier (1,210 kg / 2,668 lb) than the Deutz-Fahr Agrosun 140 (both unladen weight, as stated by the source).
Which may carry more ballast and load?10,500 kg (23,149 lb)Traktorenlexikon, “Case-IH Puma 140”8,500 kg (18,739 lb)Traktorenlexikon, “Deutz-Fahr Agrosun 140”AheadThe Case-IH Puma 140 has 24% higher maximum permissible mass (2,000 kg / 4,409 lb) than the Deutz-Fahr Agrosun 140 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?18 to 28Traktorenlexikon, “Case-IH Puma 140”24Traktorenlexikon, “Deutz-Fahr Agrosun 140”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Puma 140 and the Agrosun 140.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Case-IH Puma 140”30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr Agrosun 140”AheadThe Case-IH Puma 140 has 33% more top speed (10.0 km/h / 6.2 mph) than the Deutz-Fahr Agrosun 140 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Case-IH Puma 140”540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrosun 140”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case-IH Puma 140”independentTraktorenlexikon, “Deutz-Fahr Agrosun 140”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Case-IH Puma 140”4WDTraktorenlexikon, “Deutz-Fahr Agrosun 140”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2007–20111998–2004Ahead (a fact, not an advantage)The Case-IH Puma 140 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-IH Puma 140 has 81% more hydraulic flow (51.6 L/min / 13.6 gpm) than the Deutz-Fahr Agrosun 140 (both pump flow, as stated by the source).
  • The Case-IH Puma 140 is 24% heavier (1,210 kg / 2,668 lb) than the Deutz-Fahr Agrosun 140 (both unladen weight, as stated by the source).
  • The Case-IH Puma 140 has 24% higher maximum permissible mass (2,000 kg / 4,409 lb) than the Deutz-Fahr Agrosun 140 (both maximum permissible mass, as stated by the source).
  • The Case-IH Puma 140 has 33% more top speed (10.0 km/h / 6.2 mph) than the Deutz-Fahr Agrosun 140 (both top speed forward, as stated by the source).
  • The Case-IH Puma 140 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Puma 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrosun 140 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and a creeper range.

← Every figure for both machines, side by side, with sources