Case-IH MXU 115 vs VALMET Mega 8050 HiTech
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the MXU 115 and the Mega 8050 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | MXU 115 | Mega 8050 HiTech | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 104.7 hp | — | — |
| Drawbar power, measured measured | 86.8 hp | — | — |
| Engine | |||
| Engine power, claimed claimed | 113.5 hp | 108.5 hp | — |
| Engine declared | CNH F4CE0684C*D | VALMET 620 DSRE | differs |
| Displacement declared | 6.73 L | 6.59 L | — |
| Maximum torque declared | 381 lb·ft · 517 N·m | 340 lb·ft · 461 N·m | +12% MXU 115 |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9–31.1 mph · 40–50 km/h | — |
| Clutch declared | — | Pedal-operated dry Fichtel & Sachs single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 22.2 gpm · 84.0 L/min | 18.8 gpm · 71.0 L/min | +18% MXU 115 |
| Pressure declared | 2,466 psi · 170 bar | 2,901 psi · 200 bar | +18% Mega 8050 HiTech |
| Three-point lift at ends declared | — | 14,110 lb · 6,400 kg | — |
| Rear PTO speeds declared | 540E/540/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,839 lb · 5,370 kg | 10,450 lb · 4,740 kg | +13% MXU 115 |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 104.4 in · 2,652 mm | 100.7 in · 2,558 mm | — |
| Length declared | 177.4 in · 4,505 mm | 187.3 in · 4,757 mm | +6% Mega 8050 HiTech |
| Width declared | 92.1 in · 2,340 mm | 84.8 in · 2,155 mm | +9% MXU 115 |
| Height declared | 112.6 in · 2,860 mm | 108.3 in · 2,750 mm | — |
| Ground clearance declared | 13.8 in · 350 mm | 18.7 in · 475 mm | +36% Mega 8050 HiTech |
| Turning radius, braked declared | 14.3 ft · 4.36 m | — | — |
| Fuel tank declared | 268.4 qt · 254.0 L | 174.4 qt · 165.0 L | +54% MXU 115 |
Case-IH MXU 115 sources
Source
- Source: OECD test report 2228, 2005
- Source: Traktorenlexikon, “Case-IH MXU115”
- Source: OECD test report 2227, 2005
- Source: OECD test report 2253, 2005
VALMET Mega 8050 HiTech sources
Source
- Source: Traktorenlexikon, “Valmet Mega-8050 HiTech”
- Source: Traktorenlexikon, “Valmet Mega-8150 HiTech”