Case-IH MXU 110 or New Holland TM 130 (Traktorenlexikon)?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland TM 130: hydraulic flow and maximum permissible mass.
- The New Holland TM 130 suits loader and hydraulic implement work better on this data: 43% (36.2 L/min / 9.6 gpm) more hydraulic flow.
- The New Holland TM 130 suits road haulage better on this data: 13% (1,000 kg / 2,205 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MXU 110 | TM 130 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 80.0 kW (107.3 hp)Traktorenlexikon, “Case-IH MXU110”Measured 7% above its own claimed PTO figure (80.0 kW (107.3 hp), Traktorenlexikon, “Case-IH MXU110”). | 84.1 kW (112.8 hp)Traktorenlexikon, “New Holland TM 130” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MXU 110 and the TM 130. |
| Which pulls harder at the drawbar? | 73.0 kW (97.9 hp)OECD Test 2240 | — | No figureNo call on drawbar power: no figure on record for the TM 130. |
| Which pumps more oil for implements? | 83.3 L/min (22.0 gpm)Traktorenlexikon, “Case-IH MXU110” | 119.5 L/min (31.6 gpm)Traktorenlexikon, “New Holland TM 130” | AheadThe New Holland TM 130 has 43% more hydraulic flow (36.2 L/min / 9.6 gpm) than the Case-IH MXU 110 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 6,415 kg (14,143 lb)Traktorenlexikon, “New Holland TM 130” | No figureNo call on three-point lift: no figure on record for the MXU 110. |
| Which is heavier, for traction? | 5,188 kg (11,438 lb)Traktorenlexikon, “Case-IH MXU110” | 5,480 kg (12,081 lb)Traktorenlexikon, “New Holland TM 130” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “Case-IH MXU110” | 8,500 kg (18,739 lb)Traktorenlexikon, “New Holland TM 130” | AheadThe New Holland TM 130 has 13% higher maximum permissible mass (1,000 kg / 2,205 lb) than the Case-IH MXU 110 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 16 to 24Traktorenlexikon, “Case-IH MXU110” | 18 to 24Traktorenlexikon, “New Holland TM 130” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MXU 110 and the TM 130. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Case-IH MXU110” | 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TM 130” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540E/540/1000 rpmTraktorenlexikon, “Case-IH MXU110” | 540/540E/1000 rpmTraktorenlexikon, “New Holland TM 130” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Case-IH MXU110” | independentTraktorenlexikon, “New Holland TM 130” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDOECD test report 2240, 2005; OECD test report 2245, 2005; Traktorenlexikon, “Case-IH MXU110” | 4WDTraktorenlexikon, “New Holland TM 130” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2004–2006 | 2002–2007 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland TM 130 has 43% more hydraulic flow (36.2 L/min / 9.6 gpm) than the Case-IH MXU 110 (both pump flow, as stated by the source).
- The New Holland TM 130 has 13% higher maximum permissible mass (1,000 kg / 2,205 lb) than the Case-IH MXU 110 (both maximum permissible mass, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and a creeper range.
← Every figure for both machines, side by side, with sources