Case-IH MXM 120 vs Deutz-Fahr Agrotron 130.6

10 material differences · fewer than 12

Tractor one

2002–2007

No measured PTO figure

Tractor two

2005–2008

No measured PTO figure

Which should you choose?

Read our verdict on the MXM 120 and the Agrotron 130.6 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH MXM 120 and Deutz-Fahr Agrotron 130.6, field by field
Field	MXM 120	Agrotron 130.6	Gap
Engine
Engine power, claimed claimed	122.3 hp	120.4 hp	—
Engine declared	IVECO 675 TA/HD	Deutz BF6M 2012 C	differs
Displacement declared	7.48 L	6.06 L	+23% MXM 120
Maximum torque declared	372 lb·ft · 505 N·m	378 lb·ft · 512 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	—	Hydraulically operated wet ZF multi-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Open centre	differs
Hydraulic control declared	Load sensing	—	—
Pump flow declared	32.1 gpm · 121.5 L/min	21.9 gpm · 83.0 L/min	+46% MXM 120
Pressure declared	2,466 psi · 170 bar	—	—
Three-point lift at ends declared	14,925 lb · 6,770 kg	13,713 lb · 6,220 kg	+9% MXM 120
Rear PTO speeds declared	540E/540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,995 lb · 5,441 kg	12,037 lb · 5,460 kg	—
Maximum permissible mass declared	18,739 lb · 8,500 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	107.2 in · 2,723 mm	104.2 in · 2,647 mm	—
Length declared	184.8 in · 4,694 mm	180.6 in · 4,587 mm	—
Width declared	79.2 in · 2,012 mm	90.7 in · 2,304 mm	+15% Agrotron 130.6
Height declared	119.3 in · 3,030 mm	115.0 in · 2,922 mm	—
Ground clearance declared	15.6 in · 395 mm	20.5 in · 520 mm	+32% Agrotron 130.6
Fuel tank declared	301.2 qt · 285.0 L	317.0 qt · 300 L	+5% Agrotron 130.6

Source

Source