Case-IH MXM 190 Maxxum or Schlüter Euro Trac 1900 HM8?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MXM 190 Maxxum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Euro Trac 1900 HM8 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Case-IH MXM 190 Maxxum suits loader and hydraulic implement work better on this data: 70% (38.3 L/min / 10.1 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH MXM 190 Maxxum and Schlüter Euro Trac 1900 HM8, with the call on each
QuestionMXM 190 MaxxumEuro Trac 1900 HM8Call
Which puts more power through the PTO shaft?142.7 kW (191.4 hp)Traktorenlexikon, “Case-IH MXM190”143 kW (192 hp)Traktorenlexikon, “Schlüter Euro Trac 1900 HM 8”Not comparableNot comparable on power at the PTO shaft: the MXM 190 Maxxum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Euro Trac 1900 HM8 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MXM 190 Maxxum and the Euro Trac 1900 HM8.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MXM 190 Maxxum and the Euro Trac 1900 HM8.
Which pumps more oil for implements?93.2 L/min (24.6 gpm)Traktorenlexikon, “Case-IH MXM190”54.9 L/min (14.5 gpm)Traktorenlexikon, “Schlüter Euro Trac 1900 HM 8”AheadThe Case-IH MXM 190 Maxxum has 70% more hydraulic flow (38.3 L/min / 10.1 gpm) than the Schlüter Euro Trac 1900 HM8 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,985 kg (15,399 lb)Traktorenlexikon, “Case-IH MXM190”No figureNo call on three-point lift: no figure on record for the Euro Trac 1900 HM8.
Which is heavier, for traction?8,010 kg (17,659 lb)Traktorenlexikon, “Case-IH MXM190”7,000 kg (15,432 lb)Traktorenlexikon, “Schlüter Euro Trac 1900 HM 8”Ahead (a fact, not an advantage)The Case-IH MXM 190 Maxxum is 14% heavier (1,010 kg / 2,227 lb) than the Schlüter Euro Trac 1900 HM8 (both unladen weight, as stated by the source).
Which may carry more ballast and load?12,000 kg (26,455 lb)Traktorenlexikon, “Case-IH MXM190”No figureNo call on maximum permissible mass: no figure on record for the Euro Trac 1900 HM8.
Which has the wider choice of gears?18 to 28 forwardTraktorenlexikon, “Case-IH MXM190”Stepless (CVT)Traktorenlexikon, “Schlüter Euro Trac 1900 HM 8”DifferTransmissions differ in kind: the Case-IH MXM 190 Maxxum has 18 to 28 forward gears and the Schlüter Euro Trac 1900 HM8 is stepless (CVT) — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MXM 190 Maxxum and the Euro Trac 1900 HM8.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Case-IH MXM190”40 km/h (24.9 mph)Traktorenlexikon, “Schlüter Euro Trac 1900 HM 8”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540E/1000 rpmTraktorenlexikon, “Case-IH MXM190”540/1000 rpmTraktorenlexikon, “Schlüter Euro Trac 1900 HM 8”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case-IH MXM190”independentTraktorenlexikon, “Schlüter Euro Trac 1900 HM 8”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Case-IH MXM190”4WDTraktorenlexikon, “Schlüter Euro Trac 1900 HM 8”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2002–20071992Ahead (a fact, not an advantage)The Case-IH MXM 190 Maxxum is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-IH MXM 190 Maxxum has 70% more hydraulic flow (38.3 L/min / 10.1 gpm) than the Schlüter Euro Trac 1900 HM8 (both pump flow, as stated by the source).
  • The Case-IH MXM 190 Maxxum is 14% heavier (1,010 kg / 2,227 lb) than the Schlüter Euro Trac 1900 HM8 (both unladen weight, as stated by the source).
  • The Case-IH MXM 190 Maxxum is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Transmissions differ in kind: the Case-IH MXM 190 Maxxum has 18 to 28 forward gears and the Schlüter Euro Trac 1900 HM8 is stepless (CVT) — not called.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the MXM 190 Maxxum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Euro Trac 1900 HM8 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources