Case-IH MXM 140 Maxxum or SAME Titan 145?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the MXM 140 Maxxum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Titan 145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Case-IH MXM 140 Maxxum suits loader and hydraulic implement work better on this data: 104% (62.0 L/min / 16.4 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MXM 140 Maxxum | Titan 145 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 105.9 kW (142.0 hp)Traktorenlexikon, “Case-IH MXM140” | 106.6 kW (143.0 hp)Traktorenlexikon, “SAME Titan 145” | Not comparableNot comparable on power at the PTO shaft: the MXM 140 Maxxum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Titan 145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MXM 140 Maxxum and the Titan 145. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MXM 140 Maxxum and the Titan 145. |
| Which pumps more oil for implements? | 121.5 L/min (32.1 gpm)Traktorenlexikon, “Case-IH MXM140” | 59.5 L/min (15.7 gpm)Traktorenlexikon, “SAME Titan 145” | AheadThe Case-IH MXM 140 Maxxum has 104% more hydraulic flow (62.0 L/min / 16.4 gpm) than the SAME Titan 145 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 7,066 kg (15,578 lb)Traktorenlexikon, “Case-IH MXM140” | 7,000 kg (15,432 lb)Traktorenlexikon, “SAME Titan 145” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 5,868 kg (12,937 lb)Traktorenlexikon, “Case-IH MXM140” | 5,750 kg (12,677 lb)Traktorenlexikon, “SAME Titan 145” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 9,000 kg (19,842 lb)Traktorenlexikon, “Case-IH MXM140” | 8,500 kg (18,739 lb)Traktorenlexikon, “SAME Titan 145” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 18 to 28Traktorenlexikon, “Case-IH MXM140” | 26 to 27Traktorenlexikon, “SAME Titan 145” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MXM 140 Maxxum and the Titan 145. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Case-IH MXM140” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “SAME Titan 145” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540E/540/1000 rpmTraktorenlexikon, “Case-IH MXM140” | 540/1000 rpmTraktorenlexikon, “SAME Titan 145” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Case-IH MXM140” | independentTraktorenlexikon, “SAME Titan 145” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Case-IH MXM140” | 4WDTraktorenlexikon, “SAME Titan 145” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2002–2007 | 1995–1998 | Ahead (a fact, not an advantage)The Case-IH MXM 140 Maxxum is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Case-IH MXM 140 Maxxum has 104% more hydraulic flow (62.0 L/min / 16.4 gpm) than the SAME Titan 145 (both pump flow, as stated by the source).
- The Case-IH MXM 140 Maxxum is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the MXM 140 Maxxum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Titan 145 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources