11 material differences · fewer than 12

Tractor oneCase-IH MX 90 C1998–2000No measured PTO figureTractor twoNew Holland TS 100 (A)1997–2003No measured PTO figure

Which should you choose?

Read our verdict on the MX 90 C and the TS 100 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH MX 90 C and New Holland TS 100 (A), field by field
Field	MX 90 C	TS 100 (A)	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	New Holland 450 T/PF	differs
Displacement declared	3.99 L	4.99 L	+25% TS 100 (A)
Maximum torque declared	236 lb·ft · 320 N·m	277 lb·ft · 375 N·m	+17% TS 100 (A)
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated wet multi-plate driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	23.4 gpm · 88.4 L/min	22.7 gpm · 86.0 L/min	—
Pressure declared	3,408 psi · 235 bar	2,857 psi · 197 bar	+19% MX 90 C
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,199 lb · 5,080 kg	8,662 lb · 3,929 kg	+29% MX 90 C
Maximum permissible mass declared	17,229 lb · 7,815 kg	13,228 lb · 6,000 kg	+30% MX 90 C
Wheelbase declared	95.4 in · 2,422 mm	91.7 in · 2,330 mm	—
Length declared	175.2 in · 4,450 mm	150.0 in · 3,810 mm	+17% MX 90 C
Width declared	92.8 in · 2,357 mm	85.8–96.7 in · 2,180–2,455 mm	differs
Height, over the cab declared	112.4 in · 2,855 mm	108.7 in · 2,762 mm	—
Ground clearance declared	15.2 in · 385 mm	17.7 in · 450 mm	+17% TS 100 (A)
Turning radius, braked declared	—	10.8 ft · 3.30 m	—
Fuel tank declared	199.7 qt · 189.0 L	169.1 qt · 160.0 L	+18% MX 90 C

Source

Source