Case-IH MX 90 C vs John Deere 2700 (A)

12 material differences

Tractor one

1998–2000

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the MX 90 C and the 2700 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH MX 90 C and John Deere 2700 (A), field by field
Field	MX 90 C	2700 (A)	Gap
Engine
Engine power, claimed claimed	88.8 hp	83.9 hp	+6% MX 90 C
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	ZETOR 1201	differs
Displacement declared	3.99 L	4.16 L	—
Maximum torque declared	236 lb·ft · 320 N·m	219 lb·ft · 297 N·m	+8% MX 90 C
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–21.7 mph · 30–35 km/h	differs
Clutch declared	Pedal-operated wet multi-plate driving clutch	Pedal-operated dry ZETOR single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	23.4 gpm · 88.4 L/min	12.3 gpm · 46.7 L/min	+89% MX 90 C
Pressure declared	3,408 psi · 235 bar	2,350 psi · 162 bar	+45% MX 90 C
Three-point lift at ends declared	—	9,744 lb · 4,420 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,199 lb · 5,080 kg	8,344 lb · 3,785 kg	+34% MX 90 C
Maximum permissible mass declared	17,229 lb · 7,815 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	95.4 in · 2,422 mm	93.5 in · 2,375 mm	—
Length declared	175.2 in · 4,450 mm	165.0 in · 4,190 mm	+6% MX 90 C
Width declared	92.8 in · 2,357 mm	76.8 in · 1,950 mm	+21% MX 90 C
Height declared	112.4 in · 2,855 mm	103.9 in · 2,640 mm	+8% MX 90 C
Ground clearance declared	15.2 in · 385 mm	12.8 in · 325 mm	+18% MX 90 C
Fuel tank declared	199.7 qt · 189.0 L	111.0 qt · 105.0 L	+80% MX 90 C

Source

Source