Case-IH MX 90 C vs Deutz-Fahr AgroPrima 4.51

11 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

1989–1995

No measured PTO figure

Which should you choose?

Read our verdict on the MX 90 C and the AgroPrima 4.51 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH MX 90 C and Deutz-Fahr AgroPrima 4.51, field by field
Field	MX 90 C	AgroPrima 4.51	Gap
Engine
Engine power, claimed claimed	88.8 hp	—	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	KHD BF4L 913 T	differs
Displacement declared	3.99 L	4.09 L	—
Maximum torque declared	236 lb·ft · 320 N·m	236 lb·ft · 320 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated wet multi-plate driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	23.4 gpm · 88.4 L/min	12.2 gpm · 46.0 L/min	+92% MX 90 C
Pressure declared	3,408 psi · 235 bar	3,481 psi · 240 bar	—
Three-point lift at ends declared	—	8,378 lb · 3,800 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000/750 rpm	differs
Weight & dimensions
Unladen weight declared	11,199 lb · 5,080 kg	7,848 lb · 3,560 kg	+43% MX 90 C
Maximum permissible mass declared	17,229 lb · 7,815 kg	14,551 lb · 6,600 kg	+18% MX 90 C
Wheelbase declared	95.4 in · 2,422 mm	96.1 in · 2,441 mm	—
Length declared	175.2 in · 4,450 mm	158.7 in · 4,032 mm	+10% MX 90 C
Width declared	92.8 in · 2,357 mm	81.2 in · 2,063 mm	+14% MX 90 C
Height declared	112.4 in · 2,855 mm	103.9 in · 2,640 mm	+8% MX 90 C
Ground clearance declared	15.2 in · 385 mm	17.7 in · 450 mm	+17% AgroPrima 4.51
Turning radius, braked declared	—	13.9 ft · 4.24 m	—
Fuel tank declared	199.7 qt · 189.0 L	137.4 qt · 130 L	+45% MX 90 C

Source

Source