9 material differences · fewer than 12

Tractor oneCase-IH MX 80 C1998–2000No measured PTO figureTractor twoLandini 7800-Turbo (DT)1987–2000No measured PTO figure

Which should you choose?

Read our verdict on the MX 80 C and the 7800-Turbo (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH MX 80 C and Landini 7800-Turbo (DT), field by field
Field	MX 80 C	7800-Turbo (DT)	Gap
Engine
Engine power, claimed claimed	82.9 hp	82.9 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	Perkins LT 4.236	differs
Displacement declared	3.99 L	3.86 L	—
Maximum torque declared	218 lb·ft · 296 N·m	237 lb·ft · 322 N·m	+9% 7800-Turbo (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated wet Case-IH multi-disc driving clutch	Pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	25.3 gpm · 95.6 L/min	13.5 gpm · 51.0 L/min	+87% MX 80 C
Pressure declared	3,408 psi · 235 bar	2,901 psi · 200 bar	+18% MX 80 C
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,582 lb · 4,800 kg	8,411 lb · 3,815 kg	+26% MX 80 C
Maximum permissible mass declared	17,229 lb · 7,815 kg	—	—
Wheelbase declared	95.4 in · 2,422 mm	93.3 in · 2,371 mm	—
Length declared	163.8 in · 4,160 mm	157.1 in · 3,990 mm	—
Width declared	96.7 in · 2,455 mm	81.5 in · 2,070 mm	+19% MX 80 C
Height, over the cab declared	110.6 in · 2,809 mm	108.7 in · 2,760 mm	—
Ground clearance declared	13.4 in · 340 mm	13.1 in · 332 mm	—
Turning radius, braked declared	13.6 ft · 4.15 m	—	—
Fuel tank declared	207.1 qt · 196.0 L	156.4 qt · 148.0 L	+32% MX 80 C

Source

Source