Case-IH MX 80 C vs Ford 5640 (A)

10 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

1991–1997

No measured PTO figure

Which should you choose?

Read our verdict on the MX 80 C and the 5640 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH MX 80 C and Ford 5640 (A), field by field
Field	MX 80 C	5640 (A)	Gap
Engine
Engine power, claimed claimed	82.9 hp	74.0 hp	+12% MX 80 C
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	FORD-POWERSTAR EA 268 CID-NA	differs
Displacement declared	3.99 L	4.39 L	+10% 5640 (A)
Maximum torque declared	218 lb·ft · 296 N·m	202 lb·ft · 274 N·m	+8% MX 80 C
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated wet Case-IH multi-disc driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Open centre	differs
Pump flow declared	25.3 gpm · 95.6 L/min	9.0 gpm · 34.0 L/min	+181% MX 80 C
Pressure declared	3,408 psi · 235 bar	2,582 psi · 178 bar	+32% MX 80 C
Three-point lift at ends declared	—	6,349 lb · 2,880 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,582 lb · 4,800 kg	8,128 lb · 3,687 kg	+30% MX 80 C
Maximum permissible mass declared	17,229 lb · 7,815 kg	—	—
Wheelbase declared	95.4 in · 2,422 mm	92.1 in · 2,340 mm	—
Length declared	163.8 in · 4,160 mm	159.8 in · 4,058 mm	—
Width declared	96.7 in · 2,455 mm	77.7 in · 1,973 mm	+24% MX 80 C
Height declared	110.6 in · 2,809 mm	106.9 in · 2,716 mm	—
Ground clearance declared	13.4 in · 340 mm	16.0 in · 406 mm	+19% 5640 (A)
Turning radius, braked declared	13.6 ft · 4.15 m	—	—
Fuel tank declared	207.1 qt · 196.0 L	100.0 qt · 94.6 L	+107% MX 80 C

Source

Source