Case-IH MX 80 C vs Fiat L 75 (DT) (Traktorenlexikon)

13 material differences

Tractor one

1998–2000

No measured PTO figure

Tractor two

1996–1998

No measured PTO figure

Which should you choose?

Read our verdict on the MX 80 C and the L 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH MX 80 C and Fiat L 75 (DT) (Traktorenlexikon), field by field
Field	MX 80 C	L 75 (DT)	Gap
Engine
Engine power, claimed claimed	82.9 hp	74.0 hp	+12% MX 80 C
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	Fiat-Iveco 8045.05 R	differs
Displacement declared	3.99 L	3.91 L	—
Maximum torque declared	218 lb·ft · 296 N·m	162 lb·ft · 220 N·m	+35% MX 80 C
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated wet Case-IH multi-disc driving clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	25.3 gpm · 95.6 L/min	11.8 gpm · 44.5 L/min	+115% MX 80 C
Pressure declared	3,408 psi · 235 bar	2,466 psi · 170 bar	+38% MX 80 C
Three-point lift at ends declared	—	9,259 lb · 4,200 kg	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,582 lb · 4,800 kg	9,237 lb · 4,190 kg	+15% MX 80 C
Maximum permissible mass declared	17,229 lb · 7,815 kg	11,905 lb · 5,400 kg	+45% MX 80 C
Wheelbase declared	95.4 in · 2,422 mm	92.2 in · 2,342 mm	—
Length declared	163.8 in · 4,160 mm	157.5 in · 4,000 mm	—
Width declared	96.7 in · 2,455 mm	79.5 in · 2,020 mm	+22% MX 80 C
Height declared	110.6 in · 2,809 mm	100.4 in · 2,550 mm	+10% MX 80 C
Ground clearance declared	13.4 in · 340 mm	18.9 in · 480 mm	+41% L 75 (DT)
Turning radius, braked declared	13.6 ft · 4.15 m	11.5 ft · 3.50 m	+19% MX 80 C
Fuel tank declared	207.1 qt · 196.0 L	121.5 qt · 115.0 L	+70% MX 80 C

Source

Source