11 material differences · fewer than 12

Tractor oneCase-IH MX 80 C1998–2000No measured PTO figureTractor twoDeutz-Fahr Agroplus 851997–2005No measured PTO figure

Which should you choose?

Read our verdict on the MX 80 C and the Agroplus 85 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH MX 80 C and Deutz-Fahr Agroplus 85, field by field
Field	MX 80 C	Agroplus 85	Gap
Engine
Engine power, claimed claimed	82.9 hp	82.9 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	—	—
Displacement declared	3.99 L	—	—
Maximum torque declared	218 lb·ft · 296 N·m	250 lb·ft · 339 N·m	+15% Agroplus 85
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-operated wet Case-IH multi-disc driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Open centre	differs
Pump flow declared	25.3 gpm · 95.6 L/min	—	—
Pressure declared	3,408 psi · 235 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,582 lb · 4,800 kg	8,378 lb · 3,800 kg	+26% MX 80 C
Maximum permissible mass declared	17,229 lb · 7,815 kg	13,669 lb · 6,200 kg	+26% MX 80 C
Wheelbase declared	95.4 in · 2,422 mm	92.1 in · 2,340 mm	—
Length declared	163.8 in · 4,160 mm	146.2 in · 3,714 mm	+12% MX 80 C
Width declared	96.7 in · 2,455 mm	81.1 in · 2,060 mm	+19% MX 80 C
Height, over the cab declared	110.6 in · 2,809 mm	103.3 in · 2,624 mm	+7% MX 80 C
Ground clearance declared	13.4 in · 340 mm	18.6 in · 472 mm	+39% Agroplus 85
Turning radius, braked declared	13.6 ft · 4.15 m	—	—
Fuel tank declared	207.1 qt · 196.0 L	147.9 qt · 140 L	+40% MX 80 C

Source

Source