Case-IH MX 210 vs Steyr 9200 a

10 material differences · fewer than 12

Tractor one

2002–2005

No measured PTO figure

Tractor two

1995–1997

No measured PTO figure

Which should you choose?

Read our verdict on the MX 210 and the 9200 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH MX 210 and Steyr 9200 a, field by field
Field	MX 210	9200 a	Gap
Engine
Engine power, claimed claimed	197.3 hp	197.4 hp	—
Engine declared	CUMMINS 6 TAA-830	Steyr-VALMET WD 634 DS	differs
Displacement declared	8.27 L	7.37 L	+12% MX 210
Maximum torque declared	693 lb·ft · 939 N·m	612 lb·ft · 830 N·m	+13% MX 210
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Case-IH multi-disc clutch running in an oil bath	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	38.6 gpm · 146.1 L/min	29.1 gpm · 110.1 L/min	+33% MX 210
Pressure declared	3,024 psi · 208.5 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	16,749 lb · 7,597 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	20,205 lb · 9,165 kg	13,889 lb · 6,300 kg	+45% MX 210
Maximum permissible mass declared	30,865 lb · 14,000 kg	24,251 lb · 11,000 kg	+27% MX 210
Wheelbase declared	118.3 in · 3,005 mm	115.2 in · 2,925 mm	—
Length declared	224.0 in · 5,690 mm	203.3 in · 5,165 mm	+10% MX 210
Width declared	120.0 in · 3,048 mm	96.5 in · 2,450 mm	+24% MX 210
Height declared	124.0 in · 3,150 mm	121.3 in · 3,080 mm	—
Ground clearance declared	13.8 in · 350 mm	19.7 in · 500 mm	+43% 9200 a
Fuel tank declared	519.9 qt · 492.0 L	348.7 qt · 330.0 L	+49% MX 210

Source

Source