Case-IH MX 240 or Massey Ferguson MF 8470?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MX 240: power at the PTO, measured by a laboratory at maximum power (OECD Test 1835); the MF 8470: power at the PTO, claimed (Traktorenlexikon, “Massey Ferguson MF 8470”) — not the same quantity, basis and condition.

  • The Massey Ferguson MF 8470 suits loader and hydraulic implement work better on this data: 27% (32.3 L/min / 8.5 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH MX 240 and Massey Ferguson MF 8470, with the call on each
QuestionMX 240MF 8470Call
Which puts more power through the PTO shaft?175.4 kW (235.2 hp)OECD Test 1835Measured PTO power is 3% below the claimed engine power (gross or net not stated) (180.9 kW (242.6 hp)) — a different quantity: the gap is what the engine claim does not reach the shaft.184.1 kW (246.9 hp)Traktorenlexikon, “Massey Ferguson MF 8470”Not comparableNot comparable on power at the PTO shaft: the MX 240: power at the PTO, measured by a laboratory at maximum power (OECD Test 1835); the MF 8470: power at the PTO, claimed (Traktorenlexikon, “Massey Ferguson MF 8470”) — not the same quantity, basis and condition.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MX 240 and the MF 8470.
Which pulls harder at the drawbar?149.6 kW (200.6 hp)OECD Test 1835No figureNo call on drawbar power: no figure on record for the MF 8470.
Which pumps more oil for implements?117.7 L/min (31.1 gpm)Traktorenlexikon, “Case-IH MX240”150.0 L/min (39.6 gpm)Traktorenlexikon, “Massey Ferguson MF 8470”AheadThe Massey Ferguson MF 8470 has 27% more hydraulic flow (32.3 L/min / 8.5 gpm) than the Case-IH MX 240 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?8,485 kg (18,706 lb)Traktorenlexikon, “Case-IH MX240”10,707 kg (23,605 lb)Traktorenlexikon, “Massey Ferguson MF 8470”Not comparableNot comparable on three-point lift: the MX 240: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Case-IH MX240”); the MF 8470: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 8470”) — not the same quantity, basis and condition.
Which is heavier, for traction?9,414 kg (20,754 lb)Traktorenlexikon, “Case-IH MX240”9,240 kg (20,371 lb)Traktorenlexikon, “Massey Ferguson MF 8470”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?14,000 kg (30,865 lb)Traktorenlexikon, “Case-IH MX240”14,000 kg (30,865 lb)Traktorenlexikon, “Massey Ferguson MF 8470”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?18 to 24 forwardTraktorenlexikon, “Case-IH MX240”Stepless (CVT)Traktorenlexikon, “Massey Ferguson MF 8470”DifferTransmissions differ in kind: the Case-IH MX 240 has 18 to 24 forward gears and the Massey Ferguson MF 8470 is stepless (CVT) — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MX 240 and the MF 8470.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Case-IH MX240”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Massey Ferguson MF 8470”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Case-IH MX240”540/1000/540E rpmTraktorenlexikon, “Massey Ferguson MF 8470”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case-IH MX240”independentTraktorenlexikon, “Massey Ferguson MF 8470”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDOECD test report 1835, 1999; Traktorenlexikon, “Case-IH MX240”4WDTraktorenlexikon, “Massey Ferguson MF 8470”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1999–20022004–2008Ahead (a fact, not an advantage)The Massey Ferguson MF 8470 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 8470 has 27% more hydraulic flow (32.3 L/min / 8.5 gpm) than the Case-IH MX 240 (both pump flow, as stated by the source).
  • The Massey Ferguson MF 8470 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Case-IH MX 240 has 18 to 24 forward gears and the Massey Ferguson MF 8470 is stepless (CVT) — not called.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the MX 240: power at the PTO, measured by a laboratory at maximum power (OECD Test 1835); the MF 8470: power at the PTO, claimed (Traktorenlexikon, “Massey Ferguson MF 8470”) — not the same quantity, basis and condition.
  • Not comparable on three-point lift: the MX 240: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Case-IH MX240”); the MF 8470: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 8470”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources