Case-IH Magnum 7220 vs Steyr-Case 9200 a

8 material differences · fewer than 12

Tractor one

1994–1997

No measured PTO figure

Tractor two

1997–1999

No measured PTO figure

Which should you choose?

Read our verdict on the Magnum 7220 and the 9200 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Case-IH Magnum 7220 and Steyr-Case 9200 a, field by field
Field	Magnum 7220	9200 a	Gap
Engine
Engine power, claimed claimed	185.5 hp	187.5 hp	—
Engine declared	CUMMINS 6 T-830	CASE-IH 6T-830	differs
Displacement declared	8.27 L	8.27 L	—
Maximum torque declared	509 lb·ft · 690 N·m	583 lb·ft · 790 N·m	+14% 9200 a
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-immersed Case-IH multi-disc clutch	Pedal operated hydraulic wet CASE-IH multi-disc clutch	differs
Hydraulics & hitch
Pump flow declared	30.4 gpm · 115.1 L/min	30.4 gpm · 115.1 L/min	—
Pressure declared	2,451 psi · 169 bar	2,944 psi · 203 bar	+20% 9200 a
Three-point lift at ends declared	—	10,626 lb · 4,820 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	18,872 lb · 8,560 kg	17,419 lb · 7,901 kg	+8% Magnum 7220
Maximum permissible mass declared	25,519 lb · 11,575 kg	—	—
Wheelbase declared	118.3 in · 3,006 mm	118.3 in · 3,006 mm	—
Length declared	220.9 in · 5,610 mm	198.8 in · 5,049 mm	+11% Magnum 7220
Width declared	112.0 in · 2,845 mm	112.0 in · 2,845 mm	—
Height declared	121.3 in · 3,080 mm	118.8 in · 3,017 mm	—
Ground clearance declared	14.3 in · 362 mm	17.3 in · 439 mm	+21% 9200 a
Fuel tank declared	273.7–379.4 qt · 259.0–359.0 L	379.4 qt · 359.0 L	differs

Source

Source