Case-IH Magnum 7220 vs New Holland TM 175 (Traktorenlexikon)

13 material differences

Tractor one

1994–1997

No measured PTO figure

Tractor two

2002–2007

No measured PTO figure

Which should you choose?

Read our verdict on the Magnum 7220 and the TM 175 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH Magnum 7220 and New Holland TM 175 (Traktorenlexikon), field by field
Field	Magnum 7220	TM 175	Gap
Engine
Engine power, claimed claimed	185.5 hp	174.6 hp	+6% Magnum 7220
Engine declared	CUMMINS 6 T-830	CASE-NEW HOLLAND 675-TA/FB	differs
Displacement declared	8.27 L	7.48 L	+11% Magnum 7220
Maximum torque declared	509 lb·ft · 690 N·m	512 lb·ft · 694 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Oil-immersed Case-IH multi-disc clutch	Electrohydraulically actuated wet multi-plate drive clutch	differs
Hydraulics & hitch
Pump flow declared	30.4 gpm · 115.1 L/min	27.0 gpm · 102.1 L/min	+13% Magnum 7220
Pressure declared	2,451 psi · 169 bar	3,336 psi · 230 bar	+36% TM 175
Three-point lift at ends declared	—	16,550 lb · 7,507 kg	—
Rear PTO speeds declared	540/1000 rpm	540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	18,872 lb · 8,560 kg	15,796 lb · 7,165 kg	+19% Magnum 7220
Maximum permissible mass declared	25,519 lb · 11,575 kg	26,455 lb · 12,000 kg	—
Wheelbase declared	118.3 in · 3,006 mm	110.9 in · 2,818 mm	+7% Magnum 7220
Length declared	220.9 in · 5,610 mm	233.7 in · 5,935 mm	+6% TM 175
Width declared	112.0 in · 2,845 mm	98.2 in · 2,495 mm	+14% Magnum 7220
Height declared	121.3 in · 3,080 mm	120.1 in · 3,050 mm	—
Ground clearance declared	14.3 in · 362 mm	15.2 in · 385 mm	+6% TM 175
Turning radius, braked declared	—	22.0 ft · 6.70 m	—
Fuel tank declared	273.7–379.4 qt · 259.0–359.0 L	411.1 qt · 389.0 L	differs

Source

Source