Case-IH Magnum 7220 or Ford TW-30 (A)?

Which should you choose?

On performance, every comparable figure that differs favours the Case-IH Magnum 7220: maximum permissible mass. It is also ahead on forward gears and PTO speeds.

  • The Case-IH Magnum 7220 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 540 rpm.
  • The Case-IH Magnum 7220 suits road haulage better on this data: 29% (2,585 kg / 5,699 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH Magnum 7220 and Ford TW-30 (A), with the call on each
QuestionMagnum 7220TW-30 (A)Call
Which puts more power through the PTO shaft?116.3 kW (156.0 hp)Traktorenlexikon, “Case-IH 7220”117.1 kW (157.0 hp)Traktorenlexikon, “Ford TW 30”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Magnum 7220 and the TW-30 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Magnum 7220 and the TW-30 (A).
Which pumps more oil for implements?115.1 L/min (30.4 gpm)Traktorenlexikon, “Case-IH 7220”No figureNo call on hydraulic flow: no figure on record for the TW-30 (A).
Which lifts more on the three-point hitch?4,410 kg (9,722 lb)Traktorenlexikon, “Ford TW 30”No figureNo call on three-point lift: no figure on record for the Magnum 7220.
Which is heavier, for traction?8,560 kg (18,872 lb)Traktorenlexikon, “Case-IH 7220”6,634 kg (14,625 lb)Traktorenlexikon, “Ford TW 30”Ahead (a fact, not an advantage)The Case-IH Magnum 7220 is 29% heavier (1,926 kg / 4,246 lb) than the Ford TW-30 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?11,575 kg (25,519 lb)Traktorenlexikon, “Case-IH 7220”8,990 kg (19,820 lb)Traktorenlexikon, “Ford TW 30”AheadThe Case-IH Magnum 7220 has 29% higher maximum permissible mass (2,585 kg / 5,699 lb) than the Ford TW-30 (A) (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?24Traktorenlexikon, “Case-IH 7220”14Traktorenlexikon, “Ford TW 30”AheadThe Case-IH Magnum 7220 has 71% more forward gears (10 gears) than the Ford TW-30 (A) (both forward gears, as stated by the source).
Which offers a creeper range?YesTraktorenlexikon, “Case-IH 7220”No figureNo call on a creeper range: not stated for the TW-30 (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH 7220”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Ford TW 30”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Case-IH 7220”1000 rpmTraktorenlexikon, “Ford TW 30”AheadThe Case-IH Magnum 7220 offers 540 rpm at the PTO, which the Ford TW-30 (A) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Ford TW 30”No figureNo call on PTO independence: not stated for the Magnum 7220.
Which drives on both axles?4WDTraktorenlexikon, “Case-IH 7220”2WD / 4WDTraktorenlexikon, “Ford TW 30”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1994–19971979–1983Ahead (a fact, not an advantage)The Case-IH Magnum 7220 is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-IH Magnum 7220 is 29% heavier (1,926 kg / 4,246 lb) than the Ford TW-30 (A) (both unladen weight, as stated by the source).
  • The Case-IH Magnum 7220 has 29% higher maximum permissible mass (2,585 kg / 5,699 lb) than the Ford TW-30 (A) (both maximum permissible mass, as stated by the source).
  • The Case-IH Magnum 7220 has 71% more forward gears (10 gears) than the Ford TW-30 (A) (both forward gears, as stated by the source).
  • The Case-IH Magnum 7220 offers 540 rpm at the PTO, which the Ford TW-30 (A) does not (as stated by the sources).
  • The Case-IH Magnum 7220 is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources