Case-IH Magnum 7220 or Fiat 180-90 (DT)?
Which should you choose?
On performance, every comparable figure that differs favours the Case-IH Magnum 7220: hydraulic flow and maximum permissible mass. It is also ahead on PTO speeds.
- The Case-IH Magnum 7220 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 540 rpm.
- The Case-IH Magnum 7220 suits loader and hydraulic implement work better on this data: 127% (64.3 L/min / 17.0 gpm) more hydraulic flow.
- The Case-IH Magnum 7220 suits road haulage better on this data: 16% (1,575 kg / 3,472 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Magnum 7220 | 180-90 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 116.3 kW (156.0 hp)Traktorenlexikon, “Case-IH 7220” | 115.5 kW (154.9 hp)Traktorenlexikon, “Fiatagri 180-90 DT” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Magnum 7220 and the 180-90 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Magnum 7220 and the 180-90 (DT). |
| Which pumps more oil for implements? | 115.1 L/min (30.4 gpm)Traktorenlexikon, “Case-IH 7220” | 50.8 L/min (13.4 gpm)Traktorenlexikon, “Fiatagri 180-90 DT” | AheadThe Case-IH Magnum 7220 has 127% more hydraulic flow (64.3 L/min / 17.0 gpm) than the Fiat 180-90 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 6,600 kg (14,551 lb)Traktorenlexikon, “Fiatagri 180-90 DT” | No figureNo call on three-point lift: no figure on record for the Magnum 7220. |
| Which is heavier, for traction? | 8,560 kg (18,872 lb)Traktorenlexikon, “Case-IH 7220” | 6,330 kg (13,955 lb)Traktorenlexikon, “Fiatagri 180-90 DT” | Ahead (a fact, not an advantage)The Case-IH Magnum 7220 is 35% heavier (2,230 kg / 4,916 lb) than the Fiat 180-90 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 11,575 kg (25,519 lb)Traktorenlexikon, “Case-IH 7220” | 10,000 kg (22,046 lb)Traktorenlexikon, “Fiatagri 180-90 DT” | AheadThe Case-IH Magnum 7220 has 16% higher maximum permissible mass (1,575 kg / 3,472 lb) than the Fiat 180-90 (DT) (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 24Traktorenlexikon, “Case-IH 7220” | 16 to 24Traktorenlexikon, “Fiatagri 180-90 DT” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | YesTraktorenlexikon, “Case-IH 7220” | — | No figureNo call on a creeper range: not stated for the 180-90 (DT). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH 7220” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri 180-90 DT” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Case-IH 7220” | 1000 rpmTraktorenlexikon, “Fiatagri 180-90 DT” | AheadThe Case-IH Magnum 7220 offers 540 rpm at the PTO, which the Fiat 180-90 (DT) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the Magnum 7220 and the 180-90 (DT). |
| Which drives on both axles? | 4WDTraktorenlexikon, “Case-IH 7220” | Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 180-90 DT” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1994–1997 | 1984–1994 | Ahead (a fact, not an advantage)The Case-IH Magnum 7220 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Case-IH Magnum 7220 has 127% more hydraulic flow (64.3 L/min / 17.0 gpm) than the Fiat 180-90 (DT) (both pump flow, as stated by the source).
- The Case-IH Magnum 7220 is 35% heavier (2,230 kg / 4,916 lb) than the Fiat 180-90 (DT) (both unladen weight, as stated by the source).
- The Case-IH Magnum 7220 has 16% higher maximum permissible mass (1,575 kg / 3,472 lb) than the Fiat 180-90 (DT) (both maximum permissible mass, as stated by the source).
- The Case-IH Magnum 7220 offers 540 rpm at the PTO, which the Fiat 180-90 (DT) does not (as stated by the sources).
- The Case-IH Magnum 7220 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources