Case-IH Magnum 7210 vs Steyr CVT 150

13 material differences

Tractor one

1994–1997

No measured PTO figure

Tractor two

2000–2003

No measured PTO figure

Which should you choose?

Read our verdict on the Magnum 7210 and the CVT 150 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH Magnum 7210 and Steyr CVT 150, field by field
Field	Magnum 7210	CVT 150	Gap
Engine
Engine power, claimed claimed	153 hp	148.0 hp	—
Engine declared	CUMMINS 6 T-830	SISU WD 629.89	differs
Displacement declared	8.27 L	6.60 L	+25% Magnum 7210
Maximum torque declared	471 lb·ft · 638 N·m	427 lb·ft · 579 N·m	+10% Magnum 7210
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Oil-immersed CASE-IH multi-plate clutch, nine plates with 228.5 mm diameter	—	—
Hydraulics & hitch
Pump flow declared	29.1 gpm · 110 L/min	32.1 gpm · 121.5 L/min	+10% CVT 150
Pressure declared	—	2,973 psi · 205 bar	—
Three-point lift at ends declared	15,873 lb · 7,200 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	16,590 lb · 7,525 kg	13,823 lb · 6,270 kg	+20% Magnum 7210
Maximum permissible mass declared	24,912 lb · 11,300 kg	24,251 lb · 11,000 kg	—
Wheelbase declared	118.3 in · 3,006 mm	111.5 in · 2,832 mm	+6% Magnum 7210
Length declared	208.3 in · 5,290 mm	190.9 in · 4,850 mm	+9% Magnum 7210
Width declared	112.0 in · 2,845 mm	97.8 in · 2,485 mm	+14% Magnum 7210
Height declared	117.4 in · 2,982 mm	119.5 in · 3,035 mm	—
Ground clearance declared	15.9 in · 404 mm	19.7 in · 500 mm	+24% CVT 150
Turning radius, braked declared	15.6 ft · 4.75 m	19.2 ft · 5.84 m	+23% CVT 150
Fuel tank declared	380.4 qt · 360.0 L	327.6 qt · 310.0 L	+16% Magnum 7210

Source

Source