Case-IH Magnum 7120 or John Deere 4640 (A)?
Which should you choose?
The figures split: the John Deere 4640 (A) is ahead on hydraulic flow; the Case-IH Magnum 7120 is ahead on three-point lift, maximum permissible mass and PTO speeds.
- The Case-IH Magnum 7120 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 540 rpm.
- The Case-IH Magnum 7120 suits road haulage better on this data: 37% (3,145 kg / 6,934 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Magnum 7120 | 4640 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 113.1 kW (151.7 hp)Traktorenlexikon, “Case-IH 7120” | 115.6 kW (155.0 hp)Traktorenlexikon, “John Deere 4640” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Magnum 7120 and the 4640 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Magnum 7120 and the 4640 (A). |
| Which pumps more oil for implements? | 108.0 L/min (28.5 gpm)Traktorenlexikon, “Case-IH 7120” | 126 L/min (33.3 gpm)Traktorenlexikon, “John Deere 4640” | AheadThe John Deere 4640 (A) has 17% more hydraulic flow (18.0 L/min / 4.8 gpm) than the Case-IH Magnum 7120 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 6,650 kg (14,661 lb)Traktorenlexikon, “Case-IH 7120” | 3,323 kg (7,326 lb)Traktorenlexikon, “John Deere 4640” | AheadThe Case-IH Magnum 7120 has 100% more lift (3,327 kg / 7,335 lb) than the John Deere 4640 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 7,532 kg (16,605 lb)Traktorenlexikon, “Case-IH 7120” | 6,510 kg (14,352 lb)Traktorenlexikon, “John Deere 4640” | Ahead (a fact, not an advantage)The Case-IH Magnum 7120 is 16% heavier (1,022 kg / 2,253 lb) than the John Deere 4640 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 11,575 kg (25,519 lb)Traktorenlexikon, “Case-IH 7120” | 8,430 kg (18,585 lb)Traktorenlexikon, “John Deere 4640” | AheadThe Case-IH Magnum 7120 has 37% higher maximum permissible mass (3,145 kg / 6,934 lb) than the John Deere 4640 (A) (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 18 to 24Traktorenlexikon, “Case-IH 7120” | 16Traktorenlexikon, “John Deere 4640” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Magnum 7120 and the 4640 (A). |
| Which is faster on the road? | 32 km/h (19.9 mph)Traktorenlexikon, “Case-IH 7120” | 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 4640” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Case-IH 7120” | 1000 rpmTraktorenlexikon, “John Deere 4640” | AheadThe Case-IH Magnum 7120 offers 540 rpm at the PTO, which the John Deere 4640 (A) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Case-IH 7120” | independentTraktorenlexikon, “John Deere 4640” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Case-IH 7120” | Two-wheel or four-wheel driveTraktorenlexikon, “John Deere 4640” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1988–1993 | 1978–1982 | Ahead (a fact, not an advantage)The Case-IH Magnum 7120 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The John Deere 4640 (A) has 17% more hydraulic flow (18.0 L/min / 4.8 gpm) than the Case-IH Magnum 7120 (both pump flow, as stated by the source).
- The Case-IH Magnum 7120 has 100% more lift (3,327 kg / 7,335 lb) than the John Deere 4640 (A) (both lift at the hitch ends, as stated by the source).
- The Case-IH Magnum 7120 is 16% heavier (1,022 kg / 2,253 lb) than the John Deere 4640 (A) (both unladen weight, as stated by the source).
- The Case-IH Magnum 7120 has 37% higher maximum permissible mass (3,145 kg / 6,934 lb) than the John Deere 4640 (A) (both maximum permissible mass, as stated by the source).
- The Case-IH Magnum 7120 offers 540 rpm at the PTO, which the John Deere 4640 (A) does not (as stated by the sources).
- The Case-IH Magnum 7120 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources